PIC24HJ32GP202-E/MM Microchip Technology, PIC24HJ32GP202-E/MM Datasheet - Page 178

• Manufacturer Part Number: PIC24HJ32GP202-E/MM
• Description: 16-bit MCU, 32KB Flash,40 MIPS,nanoWatt 28 QFN-S 6x6mm TUBE
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ32GP202-E/MM

• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 32KB (11K x 24)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 28-QFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PIC24HJ32GP202/204 AND PIC24HJ16GP304
19.7
PIC24HJ32GP202/204 and PIC24HJ16GP304 family
microcontrollers can be serially programmed while in
the end application circuit. This is done with two lines
for clock and data, and three other lines for power,
ground and the programming sequence. Serial pro-
gramming allows customers to manufacture boards
with unprogrammed devices and then program the
microcontroller just before shipping the product. Serial
programming also allows the most recent firmware or a
custom firmware to be programmed. Refer to the
“dsPIC30F/33F Flash Programming Specification”
(DS70152) document for details about In-Circuit Serial
Programming™ (ICSP)™.
Any of the following three pairs of programming
clock/data pins can be used:
• PGEC1 and PGED1
• PGEC2 and PGED2
• PGEC3 and PGED3
DS70289G-page 178
In-Circuit Serial Programming
19.8
When MPLAB
in-circuit debugging functionality is enabled. This
function allows simple debugging functions when used
with MPLAB IDE. Debugging functionality is controlled
through the Emulation/Debug Clock (PGECx) and
Emulation/Debug Data (PGEDx) pin functions.
Any of the following three pairs of debugging clock/data
pins can be used:
• PGEC1 and PGED1
• PGEC2 and PGED2
• PGEC3 and PGED3
To make use of the in-circuit debugger function of the
device, the design must implement ICSP connections
to MCLR, V
addition, when the feature is enabled, some of the
resources are not available for general use. These
resources include the first 80 bytes of data RAM and
two I/O pins.
In-Circuit Debugger
DD
®
, V
ICD 2 is selected as a debugger, the
SS
and PGECx/PGEDx pin pair. In
© 2011 Microchip Technology Inc.