PIC18LF13K50T-I/SS Microchip Technology, PIC18LF13K50T-I/SS Datasheet - Page 32

• Manufacturer Part Number: PIC18LF13K50T-I/SS
• Description: 8 KB Flash, 512 RAM, 15 I/O, 10-bit ADC, USB 2.0, NanoWatt XLP 20 SSOP .209in T/
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18LF13K50T-I/SS

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 14
• Program Memory Size: 8KB (4K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SSOP
• Processor Series: PIC18LF
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Interface Type: EUSART, I2C, MSSP, SPI, USB
• Maximum Clock Frequency: 32 KHz
• Number Of Programmable I/os: 18
• Number Of Timers: 4
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, DM164127, DV164126
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 12 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PIC18F1XK50/PIC18LF1XK50
7.0
To allow portability of code, a PIC18F1XK50/
PIC18LF1XK50 programmer is required to read the
Configuration Word locations from the hex file. If
Configuration Word information is not present in the
hex file, then a simple warning message should be
issued. Similarly, while saving a hex file, all
Configuration Word information must be included. An
option to not include the Configuration Word
information may be provided. When embedding
Configuration Word information in the hex file, it should
start at address 300000h.
Microchip Technology Inc. feels strongly that this
feature is important for the benefit of the end customer.
7.1
To allow portability of code, a PIC18F1XK50/
PIC18LF1XK50 programmer is required to read the
data EEPROM information from the hex file. If data
EEPROM information is not present, a simple warning
message should be issued. Similarly, when saving a
hex file, all data EEPROM information must be
included. An option to not include the data EEPROM
information may be provided. When embedding data
EEPROM information in the hex file, it should start at
address F00000h.
Microchip Technology Inc. believes that this feature is
important for the benefit of the end customer.
7.2
The checksum is calculated by summing the following:
• The contents of all program Flash locations
• The Configuration Word, appropriately masked
• ID locations (only if any portion of program
The Least Significant 16 bits of this sum are the
checksum.
Code protection limits access to program memory by
both external programmer (code-protect) and code
execution (table read protect). The ID locations, when
included in a code protected checksum, contain the
checksum of an unprotected part. The unprotected
checksum is distributed: one nibble per ID location.
Each nibble is right justified.
DS41342E-page 32
memory is code-protected)
EMBEDDING CONFIGURATION
WORD INFORMATION IN THE
HEX FILE
Embedding Data EEPROM
Information In the HEX File
Checksum Computation
Advance Information
Table 7-1 describes how to calculate the checksum for
each device.
Note:
The
depending on the code-protect setting.
Since the program Flash locations read
out differently, depending on the code-
protect setting, the table describes how to
manipulate the actual program Flash
values to simulate the values that would
be read from a protected device. When
calculating a checksum by reading a
device, the entire program Flash can
simply be read and summed. The
Configuration Word and ID locations can
always be read.
checksum
 2010 Microchip Technology Inc.
calculation
differs