MSC8144ADS Freescale, MSC8144ADS Datasheet - Page 15

• Manufacturer Part Number: MSC8144ADS
• Manufacturer: Freescale

Specifications of MSC8144ADS

• Lead Free Status / RoHS Status: Compliant

Hardware Preparation and Installation
This chapter provides unpacking instructions, hardware preparation, and installation instructions
for the MSC8144ADS processor board. For more details on hardware preparation, see the
Hardware Getting Started document for the MSC8144ADS processor board.
2.1 Unpacking Instructions
Note:
2.2 Installation Instructions
To install the MSC8144ADS processor board properly, perform the following steps in the order
indicated:
Freescale Semiconductor
„ Unpack equipment from shipping carton.
„ Refer to packing list and verify that all items are present.
„ Save packing material for storing and reshipping of equipment.
1.
2.
3.
4.
5.
6.
7.
Caution:
Verify that Jumpers and Switches are in default positions
(see Chapter 4, Controls and Indicators for a list of default positions).
Connect external cables in accordance with your development needs
(see Section 1.3 for details).
Connect PSU (to P10).
Move the power switch S1 to ON.
Verify that LEDs LD8 and LD1 display light. This indicates that board power is applied.
Verify that LD3 and LD4 briefly display light.
If the boot source is I
Check for completion of the reset sequence-indicated by all relevant LEDs reaching a
steady state, according to their respective meanings. (see Figure 2-1 for location of
these LEDs, see Table 4-6 for a more detailed description).
Operate the CodeWarrior™ software to verify that the board has been installed properly.
If the shipping carton is damaged upon receipt, request carrier agent to be present
during unpacking and inspection of equipment.
Avoid touching areas of integrated circuitry; static discharge can damage
circuits.
2
C, LD5 will display light during code loading.
MSC8144ADS Reference Manual, Rev. 0
2
2-1