H7BX-A AC100-240 Omron, H7BX-A AC100-240 Datasheet - Page 16

• Manufacturer Part Number: H7BX-A AC100-240
• Description: 1-stg 72x72 Multifunc Counter
• Manufacturer: Omron

Specifications of H7BX-A AC100-240

• Display Type: LCD Backlight
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Note 1. Counting cannot be performed while the reset/reset 1 input is ON.
16
Output
mode
setting
2. If reset/reset 1 input turns ON while the one-shot output is ON, the one-shot output turns OFF.
3. If there is power failure while the output is ON, the output will turn ON again when the power supply has recovered. For a one-shot output, the output will turn
4. Do not use the counter function in applications where the count may be completed (again) while the one-shot output is ON.
5. The set values are between 99999 and 999999.
ON again for the duration of the output time setting once the power supply has recovered.
K-2
D
H
L
Multifunction Counter
Reset/reset 1
Reset/reset 1
Reset/reset 1
Reset/reset 1
Set value 2
Set value 1
Set value 2
Set value 1
Set value 2
Set value 1
Set value 2
Set value 1
999999
999999
999999
999999
99999
99999
99999
99999
OUT1
OUT2
OUT1
OUT2
OUT1
OUT2
OUT1
OUT2
0
0
0
0
H7BX
UP/DOWN A, B, C
Input mode
Self-holding
output
Instanta-
(equals)
output
neous
The display continues to increase/
decrease until the overflow or
underflow value is reached.
Only a one-shot output is possible.
The display continues to increase/
decrease until the overflow or
underflow value is reached. The
outputs are ON while the count is
equal.
The display continues to increase/
decrease until the overflow or
underflow value is reached.
OUT1 is held while the present value
is less than or equal to set value 1.
OUT2 is held while the present value
is greater than or equal to set value 2.
The display continues to increase/
decrease until the overflow or
underflow value is reached.
OUT1 is held while the present value
is greater than or equal to set value 1.
OUT2 is held while the present value
is greater than or equal to set value 2.
Note: H mode is available only when
Operation after count completion
One-shot
using a 2- stage counter.
output
(The one-shot output time
can be set in the range 0.01
to 99.99s.)