DSPIC33EP512MU810T-I/PT Microchip Technology, DSPIC33EP512MU810T-I/PT Datasheet - Page 4

• Manufacturer Part Number: DSPIC33EP512MU810T-I/PT
• Description: 100 PINS, 512KB Flash, 52KB RAM, 60 MHz, USB, 2xCAN, 15 DMA 100 TQFP 12x12x1mm T
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33EPr

Specifications of DSPIC33EP512MU810T-I/PT

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 60 MIPs
• Connectivity: CAN, I²C, IrDA, LIN, QEI, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT
• Number Of I /o: 83
• Program Memory Size: 512KB (170K x 24)
• Program Memory Type: FLASH
• Eeprom Size: -
• Ram Size: 24K x 16
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 32x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

dsPIC33EPXXXMU806/810/814 and PIC24EPXXXGU810/814
Digital I/O:
• Peripheral Pin Select (PPS) Functionality
• Wake-up/Interrupt-on-Change for up to 122 pins
• Output Pins can drive from 3.0V to 3.6V
• Up to 5V Output with Open Drain Configuration
• Up to 8 or 10 mA sink on I/O pins
• Up to 8 mA or 12 mA source on I/O pins
On-Chip Flash and SRAM:
• Flash Program Memory (up to 512 Kbytes)
• Flash Auxiliary Memory (up to 24 Kbytes):
• Data SRAM (up to 52 Kbytes)
• Read/Write Security for Program Flash and
System Management:
• Flexible Clock Options:
• Programmable Power-up Timer
• Oscillator Start-up Timer
• Watchdog Timer with its own RC Oscillator
• Fail-Safe Clock Monitor
• Multiple Reset Sources
Power Management:
• On-chip 1.8V Voltage Regulator
• Switch between Clock Sources in Real Time
• Idle, Sleep, and Doze modes with Fast Wake-up
CMOS Flash Technology:
• Low-Power, High-Speed Flash Technology
• Fully Static Design
• 3.3V (±10%) Operating Voltage
• Industrial and Extended Temperature
• Low-Power Consumption
DS70616E-page 4
- Can be used as Bootloader space or for
Auxiliary Memory
- External, crystal, resonator, internal RC
- Fully integrated Phase-Locked Loop (PLL)
- Extremely low jitter PLL
- Auxiliary PLL for USB clocking
- Reference clock output
EEPROM emulation without stalling the CPU
Preliminary
Analog-to-Digital Converters (ADCs):
• 10-bit, 1.1 Msps or 12-bit, 500 Ksps Conversion:
• Additional 10-bit, 1.1 Msps ADC, with up to 16
Data Converter Interface (DCI) Module:
• Codec Interface
• Supports I
• Up to 16-bit Data Words, up to 16 Words per
Comparator Module:
• Three Analog Comparators with Programmable
• Blanking and Filtering Options
• Internal or External Voltage References
Motor Control Peripherals:
(dsPIC33EPXXXMU806/810/814 Devices
Only)
• Motor Control PWM:
- Two and four simultaneous samples (10-bit mode)
- Up to 32 input channels with auto-scanning
- Conversion start can be manual or
- Conversions in Sleep mode
- ±2 LSb max integral nonlinearity
- ±1 LSb max differential nonlinearity
Input Channels
Frame:
- 4-word deep TX and RX buffers
Input/Output Configuration
- Two master time base modules can control
- Up to seven PWM generators
- Two PWM outputs per PWM generator
- Individual period and duty cycle for each
- Dead-time insertion and correction
- Duty cycle, dead time, phase shift and
- Seven independent Fault and current-limit
- Center-Aligned, Edge-Aligned, Push-Pull,
- Output override control
- Output Chopping (gated) mode
- Special Event Triggers
synchronized with one of 13 trigger sources
dual 3-phase motors simultaneously
PWM output
frequency resolution of 8.32 ns
inputs
Multi-Phase, Variable Phase, Fixed Off-time,
Current Reset and Current Limit modes
2
S and AC’97 Protocols
 2009-2011 Microchip Technology Inc.