33000 Parallax Inc, 33000 Datasheet - Page 4

• Manufacturer Part Number: 33000
• Description: Power Management Modules & Development Tools 30W Solar Cell Kit
• Manufacturer: Parallax Inc

Specifications of 33000

• New! Us2012 Catalog Page: Solar Cells_Panels
• Voltage - Output: *
• Operating Temperature: *
• Current Short Circuit (isc): *
• Package / Case: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Step 4 — Prepare the single-conductor bus-bars
Copyright © Parallax Inc.
Carefully measure out a length of
flat, double-conductor wire 23”
long, and cut it with a pair of
scissors.
Then, with a sharp knife (X-acto
knives work well), carefully slice
through just the white protective
cover 3/8” from each end and
remove it, as shown in Figure 4
(both ends are shown here for
clarity). Be careful to not cut
through the copper conductors
- only the white protective cover.
Remove the pink protective strip
(exposing the adhesive side), and
place the double conductor bus-bar
in groove “A”, as shown in Figure 5.
Burnish or rub the bus-bar to
ensure that it’s flat, and fully
adhered to the groove. Only the
ends of the bus-bar should have the
white cover removed. The rest of
the white cover should remain in
place.
Measuring carefully, cut two 7.75”
long pieces of double conductor
bus-bars with the pair of scissors.
Cut out each conductor so that
there are four strips with the
protective covers intact (Figure 6).
Cut right next to the copper itself;
leave no transparent “sticky”
material along the edges. This way,
when you place the single bars into
the grooves, there are no “stickies”
along the vertical walls of the
grooves—the whole bus-bar
assembly will lay flat on the bottom
of the groove.
30 Watt Solar Panel Kit (#33000)
Figure 4
Figure 5
Figure 6
v1.0 2/19/2010 Page 4 of 20