C500RM201 Omron, C500RM201 Datasheet - Page 65

• Manufacturer Part Number: C500RM201
• Description: WRITE MASTER
• Manufacturer: Omron

Specifications of C500RM201

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Remote Terminal
Pin 6: Output HOLD/STOP Mode
Switches
Pins 1 to 5: Word Setting
Remove the switch cover to access the DIP switch and terminator switch. Set
these as shown below. The switch cover is in a slightly different position on
G72C Remote Terminals.
Word numbers are computed as binary numbers with pins 1 through 5 repre-
senting the one’s place though the 16’s place. For example, turning on all five
pins would set word 31, i.e., 2
Pin 5 must be set OFF for all Remote Terminals, in C120 Systems, i.e., the
highest word that can be set is 15.
The word actually allocated to a Remote Terminal depends on the PC that
controls it and is computed as shown in the following table.
Transmission errors for Remote Terminals are the same as those for Slaves.
OFF: STOP mode
ON: HOLD mode
Pins 1 to 6
PC
C120 and C500
C1000H and C2000H
C200H
All output words set to OFF for transmission errors.
All output words retain status for transmission errors.
Allocated word
Same as switch setting
32 x word multiplier of Master + switch setting
Switch setting + 200
0
+ 2
+
1
+ 2
–
2
+ 2
ON (right):
OFF (left):
3
+ 2
4
= 1 + 2 + 4 + 8 + 16 = 31.
Terminator
All others
Section 4-2
55