C500RM201 Omron, C500RM201 Datasheet - Page 50

• Manufacturer Part Number: C500RM201
• Description: WRITE MASTER
• Manufacturer: Omron

Specifications of C500RM201

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Setting Procedure
3-3
C1000H Example
Setting Procedure
!
C500 Master
Caution
1, 2, 3...
C1000H PC
16 pts.
16 pts.
16 pts.
16 pts.
32 pts.
64 pts.
16 pts.
Restrictions placed on Systems combining C500 Masters and C200H Slaves
depend on the PC to which the Master(s) is mounted. Refer to 2-1 Basic Sys-
tem for details.
When C200H Slave Racks are connected to Masters on PCs other than the
C200H/C200HS, all Output Units on these Slave Racks will be treated as having
at least 16 output points. disabling the Fuse-burnout and Alarm Detection Bits on
Units that normally provide them (e.g., C200H-OD411, C200H-OD213,
C200H-OD214, and C200H-OA221).
When using the C200H Backplane for 10 slots as a remote I/O Slave for the
CVM1/CV500/CV1000/CV2000, only the 8 slots from the left can be used; the
9th and 10th slots from the left cannot be used.
Set the Units in the following order. This procedure must be carried out
whenever Masters, Slaves, or Remote Terminals are added to the System.
1.
2.
3.
Turn off the power, set the unit numbers of the Slaves and check the last
I/O word being used by the PC. For a C1000H or C2000H System, al-
ways set Slave unit numbers in order starting from number 0. (See
Maximum Number of Connectable Units under 2-1 Basic System. )
Set Remote Terminal words so that no words being used by the PC are
used again. Also, do not set more than the available number of words.
Doing so will result in an I/O error.
Connect the 2-conductor cables starting from each Master and working
out to each Unit that will be a terminator. Be sure to connect positive to
positive, negative to negative.
IR 20
IR 19
IR 8
IR 7
IR 5 & 6
IR 1, 2, 3, & 4
IR 0
C200H Slave
C200H Slave
IR 13
IR 12
IR 11
IR 10
IR 9
IR 18
IR 17
IR 16
IR 15
IR 14
Set to Unit #0 and
to Master other
than C200H.
Set to Unit #1, to
Master other than
C200H, and as ter-
minator.
Section 3-3
39