C500LK009V1 Omron, C500LK009V1 Datasheet - Page 42

• Manufacturer Part Number: C500LK009V1
• Description: PC LINK UNIT
• Manufacturer: Omron

Specifications of C500LK009V1

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Cable Connection
3-4-2 Optical Fiber Cable
Required Components
28
1, 2, 3...
Note
5. Any bends in the coaxial cable must be 45 mm in radius or greater (six times
1. Check to be sure that the coaxial cable if firmly locked into place after con-
2. Do not pull on the cable. Pulling on the cable could break wires inside.
3. Do not bend the cable past the minimum radius. Bending the cable too far
4. Do not place heavy objects on the cable or connectors. Heavy objects could
1. Optical fiber cable:
2. Optical Connectors:
3. Optical Connector Assembly Tools:
4. Optical Fiber Tester (Optical Power Tester):
the outer diameter of the cable). When laying the cable, make wider bends
of 110 mm in radius or greater (15 times the outer diameter of the cable).
necting it.
could break wires inside.
break wires inside.
Use Hard Plastic-clad Optical Fiber Cable (H-PCF). Refer to Appendix A
Standard Models for details on available lengths and colors.
There are two types of Optical Connector available, as shown below. Use
the cable splicing connector to splice cable.
Note Using an inline adapter to splice the cable will reduce the maximum
These tools are required to attach the Optical Fiber Cable to the Optical
Connector.
Note Optical fiber cable cutters are included.
Node-cable connection
Cable splicing
S3200-CAK1062
S3200-CAT2700
Optical Connector Assembly Tool Set
Radius
Tester Set
transmission distance because of loss at the junction. Refer to your
hard plastic-clad optical fiber cable (H-PCF) installation manual for
details.
Function
> 45 mm
S3200-CAT2702
Head Unit
S3200-COCF2071
S3200-COIAT2000
(inline adapter)
Model number
S3200-COCF2071 (C1000H)
S3200-COCF2571 (C200HS)
S3200-COCF2071 (C1000H)
S3200-COCF2571 (C200HS)
Applicable Connectors
2 for each node
1 for each break in the cable
Applicable Connectors
Number required
Section 3-4