C500LK009V1 Omron, C500LK009V1 Datasheet - Page 39

• Manufacturer Part Number: C500LK009V1
• Description: PC LINK UNIT
• Manufacturer: Omron

Specifications of C500LK009V1

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Bus Connector (C200HX/HG/HE/HS/H only)
3-3
Bus Bar Connection
C200HS, C200H
C200HX,
C200HG
C200HG,
C200HE
C200H,
C200HS
C200HS
CPU Unit
,
,
Bus Connector (C200HX/HG/HE/HS/H only)
C200HW-COM01 or
C200HW COM04 EV1
C200HW-COM04-EV1
---
Communications
Board
1, 2, 3...
Note
A Bus Connector is required to connect a C200HW-SLK13/14/23/24 SYS-
MAC LINK Unit to the CPU Unit of a C200HX, C200HG, C200HE, C200HS,
or C200H PC.
There are three models of Bus Connector available. One is used when a
single SYSMAC LINK Unit is being mounted on the CPU Rack, one is used
when two Units are being mounted (either two SYSMAC LINK Units or a
SYSMAC LINK Unit and a SYSMAC NET Link Unit), and one is used when a
single SYSMAC LINK Unit and a single PC Card Unit are mounted (C200HX/
HG/HE CPU Units only).
Connect the Bus Connector as described below after turning off the PC.
or
1. When using the C200HS or C200H PC, align the Bus Connector so it fits into
2. Tighten the two screws on the Bus Connector to secure it.
1. Turn off the power supply to the PC before connecting the Bus Connector.
2. Firmly tighten the mounting screws of the Bus Connector.
C200HW-CE001 Used when mounting just one SYSMAC LINK Unit.
C200HW-CE002 Used when mounting two SYSMAC LINK Units or a SYSMAC
C200HW-CE012 Used when mounting one SYSMAC LINK Unit and one PC
C200H-CE001
C200H-CE002
Bus Connector
the connectors on both the SYSMAC LINK Unit and PC CPU Unit, and then
press it into the connectors.
When using the C200HX, C200HG, or C200HE PC, mount the Communica-
tions Board on the CPU Unit, align the Bus Connector so it fits into the con-
nectors on both the SYSMAC LINK Unit and Communications Board, and
then press it into the connectors.
LINK Unit and a SYSMAC NET Link Unit.
Card Unit.
Used when mounting just one SYSMAC LINK Unit.
Used when mounting two SYSMAC LINK Units or a SYSMAC
LINK Unit and a SYSMAC NET Link Unit.
C200HX, C200HG, C200HE
Communications Board
C200HW-COM01 or
C200HW-COM04-EV1
Function
Section 3-3
25