LAN9218-MT SMSC, LAN9218-MT Datasheet - Page 51

• Manufacturer Part Number: LAN9218-MT
• Description: CONTROLLER, ENET, 10/100, 100TQFP
• Manufacturer: SMSC

Specifications of LAN9218-MT

• Data Rate: 100Mbps
• No. Of Ports: 2
• Ethernet Type: IEEE 802.3 / 802.3u
• Supply Current: 40mA
• Supply Voltage Range: 2.97V To 3.63V
• Operating Temperature Range: 0°C To +70°C
• Digital Ic Case Style: TQFP
• Interface Type: HBI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

High-Performance Single-Chip 10/100 Ethernet Controller with HP Auto-MDIX
Datasheet
SMSC
3.11.6.2
LAN9218
TX Command 'A'
Buffer End Alignment = 0
Data Start Offset = 6
First Segment = 1
Last Segment = 1
Buffer Size =183
TX Command 'B'
Packet Length = 183
TX Example 2
In this example, a single 183-Byte Ethernet packet will be transmitted. This packet is in a single buffer
as follows:
Figure 3.14, "TX Example 2"
how data is passed to the TX data FIFO. Note that the packet resides in a single TX Buffer, therefore
both the FS and LS bits are set in TX command ‘A’.
2-Byte “Data Start Offset”
183-Bytes of payload data
4-Byte “Buffer End Alignment”
31
Ethernet Controller
Data Written to the
6-Byte Data Start Offset
183-Byte Payload Data
TX Command 'A'
TX Command 'B'
illustrates the TX command structure for this example, and also shows
Figure 3.14 TX Example 2
3B End Padding
DATASHEET
51
0
NOTE: Extra bytes between buffers
are not transmitted
Data Passed to the
183-Byte Payload Data
TX Data FIFO
TX Command 'A'
TX Command 'B'
Revision 1.93 (11-27-07)