DP83848VYB National Semiconductor, DP83848VYB Datasheet - Page 44

• Manufacturer Part Number: DP83848VYB
• Description: TRANSCEIVER, ENET PHY, 10/100, 48LQFP
• Manufacturer: National Semiconductor

Specifications of DP83848VYB

• Data Rate: 100Mbps
• No. Of Ports: 1
• Ethernet Type: IEEE 802.3u
• Supply Current: 92mA
• Supply Voltage Range: 3V To 3.6V
• Operating Temperature Range: -40°C To +105°C
• Digital Ic Case Style: LQFP
• No.: RoHS Compliant
• Interface Type: MII Serial, RMII
• Rohs Compliant: Yes
• Lead Free Status / Rohs Status: Not Compliant

www.national.com
Bit
5
4
3
2
1
0
AUTO-NEG COMPLETE
LOOPBACK STATUS
DUPLEX STATUS
JABBER DETECT
SPEED STATUS
LINK STATUS
Bit Name
Default
0, RO
0, RO
0, RO
0, RO
0, RO
0, RO
Jabber Detect: This bit only has meaning in 10 Mb/s mode.
This bit is a duplicate of the Jabber Detect bit in the BMSR register, except
that it is not cleared upon a read of the PHYSTS register.
1 = Jabber condition detected.
0 = No Jabber.
Auto-Negotiation Complete:
1 = Auto-Negotiation complete.
0 = Auto-Negotiation not complete.
Loopback:
1 = Loopback enabled.
0 = Normal operation.
Duplex:
This bit indicates duplex status and is determined from Auto-Negotiation or
Forced Modes.
1 = Full duplex mode.
0 = Half duplex mode.
Note: This bit is only valid if Auto-Negotiation is enabled and complete and
there is a valid link or if Auto-Negotiation is disabled and there is a valid link.
Speed10:
This bit indicates the status of the speed and is determined from Auto-
Negotiation or Forced Modes.
1 = 10 Mb/s mode.
0 = 100 Mb/s mode.
Note: This bit is only valid if Auto-Negotiation is enabled and complete and
there is a valid link or if Auto-Negotiation is disabled and there is a valid link.
Link Status:
This bit is a duplicate of the Link Status bit in the BMSR register, except that
it will not be cleared upon a read of the PHYSTS register.
1 = Valid link established (for either 10 or 100 Mb/s operation).
0 = Link not established.
44
Description