IS-C0203-F-E NKK Switches, IS-C0203-F-E Datasheet - Page 23

• Manufacturer Part Number: IS-C0203-F-E
• Description: SMARTSWITCH CONTROLLER LCD
• Manufacturer: NKK Switches

Specifications of IS-C0203-F-E

• Accessory Type: Controller
• Description/function: SMARTSWITCH Development Kit
• For Use With/related Products: SmartSwitch™ Switches
• For Use With: 360-2345 - SWITCH COMPACT LCD 64X32 RGB360-2343 - SWITCH LCD 64X32 RGB360-2341 - DISPLAY LCD 64X32IS01BCEF - SMARTDISPLAY SUPER YEL/GRN LEDIS01BCE - SMARTDISPLAY SUPER YELLOW LEDIS15SBFP4B - SMARTSWITCH COMPACT WHITE LEDIS15SBCP4EF - SMARTSWITCH COMPACT YEL/GRN LEDIS15SACP4CF - SMARTSWITCH COMPACT RED/GRN LEDIS15ABFP4B - SMARTSWITCH STD BLK W/WHITE LEDIS15ABDP4B - SMARTSWITCH STD BLU W/WHITE LEDIS15ABDP4EG - SMARTSWITCH STD YELLOW/BLUE LEDIS15ABDP4E - SMARTSWITCH STD BLUE W/YEL LEDIS15ABCP4EF - SMARTSWITCH STD YEL/GRN LEDIS15ABCP4E - SMARTSWITCH STD LED YELLOWIS15AACP4CF - SMARTSWITCH STD YEL RED/GRN LED360-2334 - SMARTDISPLAY RED/GREEN/BLUE360-2333 - SMARTDISPLAY SUPER RED/GREEN LED360-2332 - SMARTSWITCH STANDARD RED/GRN/BLU360-2331 - SMARTSWITCH COMPACT RED/GRN/BLU360-2330 - SMARTSWITCH STD RED/GRN LED360-2329 - SMARTSWITCH COMPACT RED/GRN LED
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 360-2425

7850 East Gelding Drive • Scottsdale, AZ 85260-3420
7. Key Terms & Definitions
Module
Host
Byte
Nibble/Hex digit
ASCII
Communication
Format
Address
8. Firmware issues
The problems found in the most current version are listed below and will be resolved in the following version.
Version V11
C0203 User Manual.doc
1. Command 29H: High resolution does not upload complete data.
2. Command 26H 52H 58H: Uploads version 10 instead of current version 11.
3. Command 26H 51H 5DH: Does not work for standard or high resolution.
4. Command 26H 51H 5EH: Does not work for standard or high resolution.
Toll Free 1.877.2BUYNKK (877.228.9655) • Phone [phone] • Fax [phone]
C0203 Intelligent Controller User Manual
NKK Switches’ LCD SmartSwitches and SmartDisplays.
Any computer, terminal, or other device that can communicate over the
RS232 line.
An eight bit hex value ranging from 00H to FFH (Decimal 0 to 255). The bit
format of a byte is: (B7 B6 B5 B4 B3 B2 B1 B0) where B7 is most significant
and bit B0 is least significant bit.
A four bit value ranging from 0H to FH. A byte consists of two nibbles.
A byte value representing a symbol.
There are two formats to transmit a byte:
1. Hex format - A hex byte is transmitted without any change to it. [xxH] will
2. ASCII HEX format - Each nibble of the byte is converted to ASCII code
A one byte value ranging from 01H to FFH representing the 255 memory.
be used to denote this.
All commands and some data are sent by using this format.
and sent as a byte. [xxAH] will be used to denote this.
For example, the hex byte 5AH is transmitted in two bytes, 35H and 41H.
The ASCII value for 5 is 35H and the ASCII value for A is 41H.
All addresses and most data are sent using this format.
www.nkkswitches.com • Email [e-mail]
Page 23 of 23
0409