IS-C0203-F-E NKK Switches, IS-C0203-F-E Datasheet - Page 12

• Manufacturer Part Number: IS-C0203-F-E
• Description: SMARTSWITCH CONTROLLER LCD
• Manufacturer: NKK Switches

Specifications of IS-C0203-F-E

• Accessory Type: Controller
• Description/function: SMARTSWITCH Development Kit
• For Use With/related Products: SmartSwitch™ Switches
• For Use With: 360-2345 - SWITCH COMPACT LCD 64X32 RGB360-2343 - SWITCH LCD 64X32 RGB360-2341 - DISPLAY LCD 64X32IS01BCEF - SMARTDISPLAY SUPER YEL/GRN LEDIS01BCE - SMARTDISPLAY SUPER YELLOW LEDIS15SBFP4B - SMARTSWITCH COMPACT WHITE LEDIS15SBCP4EF - SMARTSWITCH COMPACT YEL/GRN LEDIS15SACP4CF - SMARTSWITCH COMPACT RED/GRN LEDIS15ABFP4B - SMARTSWITCH STD BLK W/WHITE LEDIS15ABDP4B - SMARTSWITCH STD BLU W/WHITE LEDIS15ABDP4EG - SMARTSWITCH STD YELLOW/BLUE LEDIS15ABDP4E - SMARTSWITCH STD BLUE W/YEL LEDIS15ABCP4EF - SMARTSWITCH STD YEL/GRN LEDIS15ABCP4E - SMARTSWITCH STD LED YELLOWIS15AACP4CF - SMARTSWITCH STD YEL RED/GRN LED360-2334 - SMARTDISPLAY RED/GREEN/BLUE360-2333 - SMARTDISPLAY SUPER RED/GREEN LED360-2332 - SMARTSWITCH STANDARD RED/GRN/BLU360-2331 - SMARTSWITCH COMPACT RED/GRN/BLU360-2330 - SMARTSWITCH STD RED/GRN LED360-2329 - SMARTSWITCH COMPACT RED/GRN LED
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 360-2425

7850 East Gelding Drive • Scottsdale, AZ 85260-3420
Command to set one LCD/LED Code
[LCD Module #] is the switch number (31H for switch 1, 32H for switch 2)
[LED code] is one byte for standard resolution and two bytes for high resolution (first byte for on-cycle and
second byte for off cycle). B0 and B1 must be 1 for high resolution.
Command to query controller for mode, controller, and firmware version
[mode] is one byte. 31H indicates standard resolution module mode or 32H indicates high resolution mode.
[Controller name] is five bytes. 43H 30H 32H 30H 33H (C0203)
[version] is one byte. 12H (version 1.1)
Command to upload the active Addresses
Command to set the data version
Command to upload the data version
C0203 User Manual.doc
This command updates the LED’s of specified switch with the LED code.
This command queries the controller for the mode as set by the Mode Select Switch, the controller
name, and the firmware version installed.
Example: The command is sent. The controller responds with the following:
This command transmits 61H followed by the active addresses for switch 1 and 2 in hex format.
This command sets the version of the data in the FLASH memory. Default value (00H).
This command uploads the version of the data in the FLASH memory to the host in one byte HEX
format.
command format: 2FH [LCD Module #] [LED code]
transmit format:
command format:
transmit format:
command format:
transmit format:
command format:
transmit format:
command format:
transmit format:
61H
61
Toll Free 1.877.2BUYNKK (877.228.9655) • Phone [phone] • Fax [phone]
[mode]
31
C0203 Intelligent Controller User Manual
(xxH)
(xxH) (xxH) (xxH)
(xxH) (xxH)
(xxH) (xxH)
(xxH) (xxH)
26H
26H
26H
26H
[Controller name]
www.nkkswitches.com • Email [e-mail]
43 30 32 30 33
52H
00H
42H
41H
(31H or 32H)
[Data Version]
58H
(xxAH)
[version]
(xxAH)
3131
79H
79
Page 12 of 23
0409