IS-C0203-F-E NKK Switches, IS-C0203-F-E Datasheet - Page 10

• Manufacturer Part Number: IS-C0203-F-E
• Description: SMARTSWITCH CONTROLLER LCD
• Manufacturer: NKK Switches

Specifications of IS-C0203-F-E

• Accessory Type: Controller
• Description/function: SMARTSWITCH Development Kit
• For Use With/related Products: SmartSwitch™ Switches
• For Use With: 360-2345 - SWITCH COMPACT LCD 64X32 RGB360-2343 - SWITCH LCD 64X32 RGB360-2341 - DISPLAY LCD 64X32IS01BCEF - SMARTDISPLAY SUPER YEL/GRN LEDIS01BCE - SMARTDISPLAY SUPER YELLOW LEDIS15SBFP4B - SMARTSWITCH COMPACT WHITE LEDIS15SBCP4EF - SMARTSWITCH COMPACT YEL/GRN LEDIS15SACP4CF - SMARTSWITCH COMPACT RED/GRN LEDIS15ABFP4B - SMARTSWITCH STD BLK W/WHITE LEDIS15ABDP4B - SMARTSWITCH STD BLU W/WHITE LEDIS15ABDP4EG - SMARTSWITCH STD YELLOW/BLUE LEDIS15ABDP4E - SMARTSWITCH STD BLUE W/YEL LEDIS15ABCP4EF - SMARTSWITCH STD YEL/GRN LEDIS15ABCP4E - SMARTSWITCH STD LED YELLOWIS15AACP4CF - SMARTSWITCH STD YEL RED/GRN LED360-2334 - SMARTDISPLAY RED/GREEN/BLUE360-2333 - SMARTDISPLAY SUPER RED/GREEN LED360-2332 - SMARTSWITCH STANDARD RED/GRN/BLU360-2331 - SMARTSWITCH COMPACT RED/GRN/BLU360-2330 - SMARTSWITCH STD RED/GRN LED360-2329 - SMARTSWITCH COMPACT RED/GRN LED
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 360-2425

7850 East Gelding Drive • Scottsdale, AZ 85260-3420
[Address] is one byte with value of 01H to FFH sent as ASCII HEX format.
[Legend Block] is 125 bytes in standard resolution mode and is 256 bytes in high resolution mode transmitted
in ASCII HEX format.
The controller disables the timers and switch execution upon receiving this command. However, the switches
are still scanned and reported. They are enabled upon reboot/power up or by command from host.
Command to upload a Legend block
[Address] is one byte with value of 01H to FFH sent as ASCII HEX format.
The controller transmits back the image (125 bytes in standard resolution mode and is 256 bytes in high
resolution mode) in HEX format.
The controller disables the timers and switch execution upon receiving this command. However, the switches
are still scanned and reported. They are enabled upon reboot/power up or by command from host.
Command to download attribute block
[Address] is one byte with value of 01H to FFH sent as ASCII HEX format.
[Attribute Block] is six bytes in standard resolution mode and is eight bytes in high resolution mode
transmitted in ASCII HEX format.
The controller disables the timers and switch execution upon receiving this command. However, the switches
are still scanned and reported. They are enabled upon reboot/power up or by command from host.
Command to upload an attribute block
[Address] is one byte with value of 01H to FFH sent as ASCII HEX format.
[Attribute Block] is six bytes in standard resolution mode and is eight bytes in high resolution mode
transmitted in ASCII HEX format.
The controller transmits back the [Attribute block] in hex format.
C0203 User Manual.doc
This command uploads a Legend block from the EEPROM location to the host.
This command downloads an attribute block from the host to the EEPROM location.
This command uploads an attribute block from the EEPROM location to the host.
command format:
transmit format:
command format: 2AH [Address] [Attribute Block]
transmit format:
command format: 2BH [Address]
transmit format:
Toll Free 1.877.2BUYNKK (877.228.9655) • Phone [phone] • Fax [phone]
C0203 Intelligent Controller User Manual
(xxH)
(xxH)
(xxH)
29H
www.nkkswitches.com • Email [e-mail]
[Address]
(xxAH)
(xxAH)
(xxAH)
(xxAH)
Page 10 of 23
0409