XBP24-PKI-001-RA Digi International/Maxstream, XBP24-PKI-001-RA Datasheet - Page 58

• Manufacturer Part Number: XBP24-PKI-001-RA
• Description: MODULE 802.15.4 RS-232 ANT
• Manufacturer: Digi International/Maxstream
• Series: XBEE-PRO™r

Specifications of XBP24-PKI-001-RA

• Frequency: 2.4GHz
• Data Rate - Maximum: 250kbps
• Modulation Or Protocol: 802.15.4
• Applications: Home/Building Automation, Industrial Control, ZigBee™
• Power - Output: 0dBm
• Sensitivity: -92dBm
• Voltage - Supply: 2.8 V ~ 3.4 V
• Current - Receiving: 55mA
• Data Interface: Connector, Female DB-9
• Antenna Connector: RP-SMA
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Memory Size: -
• Current - Transmitting: -
• Other names: Q3255595

© 2008 Digi International, Inc.
XBee‐PRO PKG‐R® RS‐232 RF Modem – 802.15.4 ‐ Product Manual v1.xAx
5.2. European Certification
5.2.1. OEM Labeling Requirements
5.2.2. Restrictions
5.2.3. Declarations of Conformity
5.2.4. Approved Antennas
The XBee-PRO RF Modem has been certified for use in several European countries. For a complete
list, refer to www.Digi.com.
If the XBee-PRO RF Modems are incorporated into a product, the manufacturer must ensure
compliance of the final product to the European harmonized EMC and low-voltage/safety
standards. A Declaration of Conformity must be issued for each of these standards and kept on file
as described in Annex II of the R&TTE Directive.
Furthermore, the manufacturer must maintain a copy of the XBee-PRO user manual
documentation and ensure the final product does not exceed the specified power ratings, antenna
specifications, and/or installation requirements as specified in the user manual. If any of these
specifications are exceeded in the final product, a submission must be made to a notified body for
compliance testing to all required standards.
The 'CE' marking must be affixed to a visible location on the OEM product.
Figure 5‐02. CE Labeling Requirements
The CE mark shall consist of the initials "CE" taking the following form:
Power Output: The power output of the XBee-PRO RF Modems must not exceed 10 dBm. The
power level is set using the PL command and the PL parameter must equal “0” (10 dBm).
France: France imposes restrictions on the 2.4 GHz band. Go to www.art-telecom.Fr or contact
Digi for more information.
Norway: Norway prohibits operation near Ny-Alesund in Svalbard. More information can be found
at the Norway Posts and Telecommunications site (www.npt.no).
Digi has issued Declarations of Conformity for the XBee-PRO RF Modems concerning emissions,
EMC and safety. Files are located in the 'documentation' folder of the Digi CD.
Important Note
Digi does not list the entire set of standards that must be met for each country. Digi customers
assume full responsibility for learning and meeting the required guidelines for each country in their
distribution market. For more information relating to European compliance of an OEM product
incorporating the XBee-PRO RF Modem, contact Digi, or refer to the following web sites:
CEPT ERC 70-03E - Technical Requirements, European restrictions and general requirements:
Available at www.ero.dk/.
R&TTE Directive - Equipment requirements, placement on market: Available at www.ero.dk/.
When integrating high-gain antennas, European regulations stipulate EIRP power maximums. Use
the following guidelines to determine which antennas to design into an application.
• If the CE marking is reduced or enlarged, the proportions given in the above graduated draw-
• The CE marking must have a height of at least 5mm except where this is not possible on
• The CE marking must be affixed visibly, legibly, and indelibly.
ing must be respected.
account of the nature of the apparatus.
58