XBP24-PKI-001-RA Digi International/Maxstream, XBP24-PKI-001-RA Datasheet - Page 54

• Manufacturer Part Number: XBP24-PKI-001-RA
• Description: MODULE 802.15.4 RS-232 ANT
• Manufacturer: Digi International/Maxstream
• Series: XBEE-PRO™r

Specifications of XBP24-PKI-001-RA

• Frequency: 2.4GHz
• Data Rate - Maximum: 250kbps
• Modulation Or Protocol: 802.15.4
• Applications: Home/Building Automation, Industrial Control, ZigBee™
• Power - Output: 0dBm
• Sensitivity: -92dBm
• Voltage - Supply: 2.8 V ~ 3.4 V
• Current - Receiving: 55mA
• Data Interface: Connector, Female DB-9
• Antenna Connector: RP-SMA
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Memory Size: -
• Current - Transmitting: -
• Other names: Q3255595

© 2008 Digi International, Inc.
XBee‐PRO PKG‐R® RS‐232 RF Modem – 802.15.4 ‐ Product Manual v1.xAx
MSB (most significant byte) first,
LSB (least significant) last
MSB (most significant byte) first,
LSB (least significant) last
Source Address (Bytes 5-12)
Source Address (Bytes 5-6)
Start Delimiter
Start Delimiter
TX (Transmit) Status
RX (Receive) Packet: 64-bit Address
RX (Receive) Packet: 16-bit Address
0x7E
0x7E
API Identifier Value: 0x89
When a TX Request is completed, the modem sends a TX Status message. This message will
indicate if the packet was transmitted successfully or if there was a failure.
Figure 4‐14. TX Status Frames
NOTES:
API Identifier Value: 0x80
When the modem receives an RF packet, it is sent out the UART using this message type.
Figure 4‐15. RX Packet (64‐bit address) Frames
API Identifier Value: 0x81
When the modem receives an RF packet, it is sent out the UART using this message type.
Figure 4‐16. RX Packet (16‐bit address) Frames
• “STATUS = 1” occurs when all retries are expired and no ACK is received.
• If transmitter broadcasts (destination address = 0x000000000000FFFF), only
• “STATUS = 3” occurs when Coordinator times out of an indirect transmission.
“STATUS = 0 or 2” will be returned.
Timeout is defined as (2.5 x SP (Cyclic Sleep Period) parameter value).
MSB
MSB
Received Signal Strength Indicator -
Hexadecimal equivalent of (-dBm) value.
(For example: If RX signal strength = -40
dBm, “0x28” (40 decimal) is returned)
Received Signal Strength Indicator -
Hexadecimal equivalent of (-dBm) value.
(For example: If RX signal strength = -40
dBm, “0x28” (40 decimal) is returned)
Length
Length
Start Delimiter
LSB
0x7E
LSB
API Identifier
API Identifier
Identifies UART data frame being reported.
Note: If Frame ID = 0 in the TX Request, no
AT Command Response will be given.
0x81
0x80
RSSI (Byte 13)
RSSI (Byte 7)
API-specific Structure
API-specific Structure
MSB
Frame Data
Frame Data
Length
Frame ID (Byte 5)
Identifier-specific Data
Identifier-specific Data
LSB
cmdData
API Identifier
cmdData
0x89
API-specific Structure
Checksum
Checksum
1 Byte
1 Byte
Frame Data
bit 0 [reserved]
bit 1 = Address broadcast
bit 2 = PAN broadcast
bits 3-7 [reserved]
bit 0 [reserved]
bit 1 = Address broadcast
bit 2 = PAN broadcast
bits 3-7 [reserved]
Identifier-specific Data
Options (Byte 14)
Options (Byte 8)
cmdData
0 = Success
1 = No ACK (Acknowledgement) received
2 = CCA failure
3 = Purged
Checksum
1 Byte
Status (Byte 6)
Up to 100 Bytes per packet
Up to 100 Bytes per packet
RF Data (Byte(s) 15-n)
RF Data (Byte(s) 9-n)
54