UPD78F0513AGA-GAM-AX Renesas Electronics America, UPD78F0513AGA-GAM-AX Datasheet - Page 556

• Manufacturer Part Number: UPD78F0513AGA-GAM-AX
• Description: MCU 8BIT 48-LQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0/Kx2r

Specifications of UPD78F0513AGA-GAM-AX

• Core Processor: 78K/0
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 41
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

78K0/Kx2
18.3 Registers to Control Serial Interface IIC0
R01UH0008EJ0401 Rev.4.01
Jul 15, 2010
Serial interface IIC0 is controlled by the following seven registers.
(1) IIC control register 0 (IICC0)
• IIC control register 0 (IICC0)
• IIC flag register 0 (IICF0)
• IIC status register 0 (IICS0)
• IIC clock selection register 0 (IICCL0)
• IIC function expansion register 0 (IICX0)
• Port mode register 6 (PM6)
• Port register 6 (P6)
This register is used to enable/stop I
IICC0 register is set by a 1-bit or 8-bit memory manipulation instruction. However, set the SPIE0, WTIM0, and
ACKE0 bits while IICE0 bit = 0 or during the wait period. These bits can be set at the same time when the IICE0 bit
is set from “0” to “1”.
Reset signal generation clears IICC0 to 00H.
2
C operations, set wait timing, and set other I
CHAPTER 18 SERIAL INTERFACE IIC0
2
C operations.
556