DF36054GFPJ Renesas Electronics America, DF36054GFPJ Datasheet - Page 583

• Manufacturer Part Number: DF36054GFPJ
• Description: MCU 3/5V 32K J-TEMP POR&LVD 64-Q
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H Tinyr

Specifications of DF36054GFPJ

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: CAN, SCI, SSU
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 45
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-LQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F36054GFPJ; HD64F36054GFPJ

Item
Preface
Notes
Section 8 RAM
12.3.2 Timer Mode Register
(TMDR)
Main Revisions and Additions in this Edition
Page Revision (See Manual for Details)
vii
109
171
Added
When using an on-chip emulator (E7, E8) for H8/36057
and H8/36037 program development and debugging,
the following restrictions must be noted.
1. The NMI pin is reserved for the E7 or E8, and cannot
2. Pins P85, P86, and P87 cannot be used. In order to
3. Area H'D000 to H'DFFF is used by the E7 or E8, and
4. Area H'F780 to H'FB7F must on no account be
5. When the E7 or E8 is used, address breaks can be
6. When the E7 or E8 is used, NMI is an input/output
Added
Note: * When the E7 or E8 is used, area H'F780 to
Amended
Bit Bit Name
0
be used.
use these pins, additional hardware must be
provided on the user board.
is not available to the user.
accessed.
set as either available to the user or for use by the
E7 or E8. If address breaks are set as being used by
the E7 or E8, the address break control registers
must not be accessed.
pin (open-drain in output mode), P85 and P87 are
input pins, and P86 is an output pin.
SYNC
H'FB7F must not be accessed.
Rev. 4.00 Mar. 15, 2006 Page 549 of 556
Description
Timer Synchronization
0: TCNT_1 and TCNT_0 operate
1: TCNT_1 and TCNT_0 are
TCNT_1 and TCNT_0 can be
pre-set or cleared synchronously
as a different timer
synchronized
REJ09B0026-0400