DF36054GFPJ Renesas Electronics America, DF36054GFPJ Datasheet - Page 183

• Manufacturer Part Number: DF36054GFPJ
• Description: MCU 3/5V 32K J-TEMP POR&LVD 64-Q
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H Tinyr

Specifications of DF36054GFPJ

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: CAN, SCI, SSU
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 45
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-LQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F36054GFPJ; HD64F36054GFPJ

The timer V is an 8-bit timer based on an 8-bit counter. The timer V counts external events.
Compare-match signals with two registers can also be used to reset the counter, request an
interrupt, or output a pulse signal with an arbitrary duty cycle. Counting can be initiated by a
trigger input at the TRGV pin, enabling pulse output control to be synchronized to the trigger,
with an arbitrary delay from the trigger input. Figure 11.1 shows a block diagram of the timer V.
11.1
Choice of seven clock signals is available.
Choice of six internal clock sources ( /128, /64, /32, /16, /8, /4) or an external clock.
Counter can be cleared by compare match A or B, or by an external reset signal. If the count
stop function is selected, the counter can be halted when cleared.
Timer output is controlled by two independent compare match signals, enabling pulse output
with an arbitrary duty cycle, PWM output, and other applications.
Three interrupt sources: compare match A, compare match B, timer overflow
Counting can be initiated by trigger input at the TRGV pin. The rising edge, falling edge, or
both edges of the TRGV input can be selected.
Features
Section 11 Timer V
Rev. 4.00 Mar. 15, 2006 Page 149 of 556
Section 11 Timer V
REJ09B0026-0400