S912XEP100J5MAG Freescale Semiconductor, S912XEP100J5MAG Datasheet - Page 807

• Manufacturer Part Number: S912XEP100J5MAG
• Description: MCU 64K FLASH 144-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of S912XEP100J5MAG

• Core Processor: HCS12X
• Core Size: 16-Bit
• Speed: 50MHz
• Connectivity: CAN, EBI/EMI, I²C, IrDA, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 119
• Program Memory Size: 1MB (1M x 8)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 1.72 V ~ 5.5 V
• Data Converters: A/D 24x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 144-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

22.3.2.15 16-Bit Pulse Accumulator Control Register (PACTL)
When PAEN is set, the PACT is enabled.The PACT shares the input pin with IOC7.
Read: Any time
Write: Any time
Freescale Semiconductor
Module Base + 0x0020
Because of an order from the United States International Trade Commission, BGA-packaged product lines and partnumbers
CLK[1:0]
PAMOD
PEDGE
Reset
PAOVI
indicated here currently are not available from Freescale for import or sale in the United States prior to September 2010
PAEN
Field
PAI
3:2
6
5
4
1
0
W
R
Pulse Accumulator System Enable — PAEN is independent from TEN. With timer disabled, the pulse
accumulator can function unless pulse accumulator is disabled.
0 16-Bit Pulse Accumulator system disabled.
1 Pulse Accumulator system enabled.
Pulse Accumulator Mode — This bit is active only when the Pulse Accumulator is enabled (PAEN = 1). See
Table
0 Event counter mode.
1 Gated time accumulation mode.
Pulse Accumulator Edge Control — This bit is active only when the Pulse Accumulator is enabled (PAEN = 1).
For PAMOD bit = 0 (event counter mode). See
0 Falling edges on IOC7 pin cause the count to be incremented.
1 Rising edges on IOC7 pin cause the count to be incremented.
For PAMOD bit = 1 (gated time accumulation mode).
0 IOC7 input pin high enables M (bus clock) divided by 64 clock to Pulse Accumulator and the trailing falling
1 IOC7 input pin low enables M (bus clock) divided by 64 clock to Pulse Accumulator and the trailing rising edge
Clock Select Bits — Refer to
Pulse Accumulator Overflow Interrupt Enable
0 Interrupt inhibited.
1 Interrupt requested if PAOVF is set.
Pulse Accumulator Input Interrupt Enable
0 Interrupt inhibited.
1 Interrupt requested if PAIF is set.
0
0
7
edge on IOC7 sets the PAIF flag.
on IOC7 sets the PAIF flag.
22-19.
Figure 22-24. 16-Bit Pulse Accumulator Control Register (PACTL)
Unimplemented or Reserved
PAEN
0
6
MC9S12XE-Family Reference Manual Rev. 1.23
Table 22-18. PACTL Field Descriptions
PAMOD
Table
5
0
22-20.
PEDGE
0
4
Table
Description
22-19.
Chapter 22 Timer Module (TIM16B8CV2) Block Description
CLK1
0
3
CLK0
2
0
PAOVI
0
1
PAI
0
0
807