MC9S08DZ128CLF Freescale Semiconductor, MC9S08DZ128CLF Datasheet - Page 196

• Manufacturer Part Number: MC9S08DZ128CLF
• Description: MCU 8BIT 128K FLASH 48-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS08r

Specifications of MC9S08DZ128CLF

• Core Processor: HCS08
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: CAN, I²C, LIN, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 39
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 2K x 8
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 16x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-LQFP
• Package: 48LQFP
• Family Name: HCS08
• Maximum Speed: 40 MHz
• Operating Supply Voltage: 3.3|5 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 87
• Interface Type: CAN/I2C/SPI/UART
• On-chip Adc: 24-chx12-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Chapter 8 Multi-Purpose Clock Generator (S08MCGV2)
trimming approach to search for the best trim value is recommended. In Example #4: Internal Reference
Clock Trim later in this section, this approach will be demonstrated.
If a user specified trim value has been found for a device (to replace the factory trim value), this value can
be stored in FLASH memory to save the value. If power is removed from the device, the IRC can easily
be re-trimmed to the user specified value by copying the saved value from FLASH to the MCG registers.
Freescale identifies recommended FLASH locations for storing the trim value for each MCU. Consult the
memory map in the data sheet for these locations.
8.5.4.1
Example #4: Internal Reference Clock Trim
For applications that require a user specified tight frequency tolerance, a trimming procedure is provided
that will allow a very accurate internal clock source. This section outlines one example of trimming the
internal oscillator. Many other possible trimming procedures are valid and can be used.
In the example below, the MCG trim will be calibrated for the 9-bit MCGTRM and FTRIM collective
value. This value will be referred to as TRMVAL.
MC9S08DZ128 Series Data Sheet, Rev. 1
196
Freescale Semiconductor