MC908AP32CFAE Freescale Semiconductor, MC908AP32CFAE Datasheet - Page 170

• Manufacturer Part Number: MC908AP32CFAE
• Description: IC MCU 32K FLASH 8MHZ 48-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC908AP32CFAE

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: I²C, IRSCI, SCI, SPI
• Peripherals: LED, LVD, POR, PWM
• Number Of I /o: 32
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-LQFP
• Controller Family/series: HC08
• No. Of I/o's: 32
• Ram Memory Size: 2KB
• Cpu Speed: 8MHz
• No. Of Timers: 2
• Embedded Interface Type: I2C, SCI, SPI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Serial Communications Interface Module (SCI)
NEIE — Receiver Noise Error Interrupt Enable Bit
FEIE — Receiver Framing Error Interrupt Enable Bit
PEIE — Receiver Parity Error Interrupt Enable Bit
11.8.4 SCI Status Register 1
SCI status register 1 (SCS1) contains flags to signal these conditions:
SCTE — SCI Transmitter Empty Bit
170
This read/write bit enables SCI error CPU interrupt requests generated by the noise error bit, NE.
Reset clears NEIE.
This read/write bit enables SCI error CPU interrupt requests generated by the framing error bit, FE.
Reset clears FEIE.
This read/write bit enables SCI error CPU interrupt
requests generated by the parity error bit, PE. (See
•
•
•
•
•
•
•
•
This clearable, read-only bit is set when the SCDR transfers a character to the transmit shift register.
SCTE can generate an SCI transmitter CPU interrupt request. When the SCTIE bit in SCC2 is set,
SCTE generates an SCI transmitter CPU interrupt request. In normal operation, clear the SCTE bit by
reading SCS1 with SCTE set and then writing to SCDR. Reset sets the SCTE bit.
1 = SCI error CPU interrupt requests from NE bit enabled
0 = SCI error CPU interrupt requests from NE bit disabled
1 = SCI error CPU interrupt requests from FE bit enabled
0 = SCI error CPU interrupt requests from FE bit disabled
1 = SCI error CPU interrupt requests from PE bit enabled
0 = SCI error CPU interrupt requests from PE bit disabled
1 = SCDR data transferred to transmit shift register
0 = SCDR data not transferred to transmit shift register
Transfer of SCDR data to transmit shift register complete
Transmission complete
Transfer of receive shift register data to SCDR complete
Receiver input idle
Receiver overrun
Noisy data
Framing error
Parity error
Address:
Reset:
Read:
Write:
$0016
SCTE
Bit 7
1
Figure 11-12. SCI Status Register 1 (SCS1)
= Unimplemented
MC68HC908AP A-Family Data Sheet, Rev. 3
TC
6
1
SCRF
5
0
IDLE
4
0
11.8.4 SCI Status Register
OR
3
0
NF
2
0
FE
1
0
1.) Reset clears PEIE.
Freescale Semiconductor
Bit 0
PE
0