PIC18F24J10-I/SP Microchip Technology, PIC18F24J10-I/SP Datasheet - Page 245

• Manufacturer Part Number: PIC18F24J10-I/SP
• Description: IC PIC MCU FLASH 8KX16 28-DIP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F24J10-I/SP

• Program Memory Type: FLASH
• Program Memory Size: 16KB (8K x 16)
• Package / Case: 28-DIP (0.300", 7.62mm)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 21
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: SPIC/I2C/EUSART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 21
• Number Of Timers: 3
• Operating Supply Voltage: 2 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM183032, DV164136
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10-ch x 10-bit
• Package: 28SPDIP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 40 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC162074 - HEADER INTRFC MPLAB ICD2 44TQFPAC162067 - HEADER INTRFC MPLAB ICD2 40/28P
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

21.3
In parts designated “LF”, the microcontroller core is
powered from an external source that is separate from
V
In “F” devices, a low-ESR capacitor must be connected
to the V
In parts designated with an “LF” part number (i.e.,
PIC18LF45J10), power to the core must be supplied on
V
have sufficient capacitance on all supply pins.
Examples are shown in Figure 21-2.
The specifications for core voltage and capacitance
are listed inTable 24-4 of Section 24.0 “Electrical
Characteristics”.
FIGURE 21-2:
© 2009 Microchip Technology Inc.
DD
DDCORE
Note:
Note:
. This voltage is supplied on the V
PIC18LFXXJ10 Devices (Regulator Disabled):
OR
PIC18FXXJ10 Devices (Regulator Enabled):
DDCORE
2.5V
On-Chip Voltage Regulator
/V
CAP
The on-chip voltage regulator is only
available in parts designated with an “F”,
such as PIC18F45J10.
In parts designated with an “LF”, such as
PIC18LF45J10, V
exceed V
C
EFC
. It is always good design practice to
/V
3.3V
2.5V
3.3V
CAP
DD
pin for proper device operation.
CONNECTIONS FOR THE
ON-CHIP REGULATOR
.
V
V
V
V
V
V
V
V
V
DD
DDCORE
SS
DD
DDCORE
SS
DD
DDCORE
SS
PIC18FXXJ10
PIC18LFXXJ10
PIC18LFXXJ10
DDCORE
/V
/V
/V
CAP
CAP
CAP
DDCORE
must never
pin.
PIC18F45J10 FAMILY
21.3.1
When the on-chip regulator is enabled, PIC18F45J10
family devices also have a simple brown-out capability.
If the voltage supplied to the regulator is inadequate to
maintain a regulated level, the regulator Reset circuitry
will generate a BOR Reset. This event is captured by
the BOR flag bit (RCON<0>).
The operation of the BOR is described in more detail in
Section 5.4
(PIC18F2XJ10/4XJ10
Section 5.4.1 “Detecting BOR”. The brown-out voltage
levels are specific in Section 23.1 “DC Characteristics:
Supply Voltage”.
21.3.2
The on-chip regulator is designed to meet the power-up
requirements for the device. While powering up,
V
DDCORE
must never exceed V
ON-CHIP REGULATOR AND BOR
POWER-UP REQUIREMENTS
“Brown-out
Devices
DD
by 0.3 volts.
DS39682E-page 243
Reset
Only)”
(BOR)
and