w83627sf Winbond Electronics Corp America, w83627sf Datasheet - Page 133

• Manufacturer Part Number: w83627sf
• Description: Winbond I/o
• Manufacturer: Winbond Electronics Corp America

CRE5 (Default 0x00)
CRE6 (Default 0x00)
CRE7 (Default 0x00)
Bit 7
Bit 6 - 0 : Compared Code Length. When the compared codes are storaged in the data register,
Bit 7
Bit 6
Bit 5 - 0 : CIR Baud Rate Divisor. The clock base of CIR is 32k Hz, so that the baud rate is 32khz
Bit 7
Bit 6
Bit 5
Bit 4
: ENS5RST: Enable S5# signal (pin 103) to reset SUSLED mode register (CRF3 of logical
device 9).
= 0 SUSLED mode register is reset only by RSMRST#.
= 1 SUSLED mode register can be reset by RSMRST# or S5#.
these data length should be written to this register.
: ENMDATUP: Enable an MDAT low pulse to wake up system through PSOUT#.
= 0 Disable.
= 1 Enable.
: EN_SCUP: Enable SCPSNT# of Smart Card interface to wake up system through
PSOUT#.
= 0 Disable.
= 1 Enable.
divided by (CIR Baud Rate Divisor + 1).
: ENKD3.
PANSW_OUT if keyboard wake up function is enabled.
= 0 Disable the third set of key combination.
= 1 Enable the third set of key combination.
: ENKD2.
PANSW_OUT if keyboard wake up function is enabled.
= 0 Disable the second set of key combination.
= 1 Enable the second set of key combination.
: ENWIN98KEY.
PANSW_OUT if keyboard wake up function is enabled.
= 0 Disable WIN98 keyboard wake up.
= 1 Enable WIN98 keyboard wake up.
: EN_ONPSOUT. Enable to issue a 0.5 s long PSOUT# pulse when system returns from
power loss state and is supposed to be on as described in CRE4 bit 6, 5 of logical device
A.
= 0 Disable this function.
= 1 Enable this function.
Enable the second set of key combination to wake up system through
Enable the third set of key combination to wake up system through
Enable WIN98 keyboard dedicated key to wake up system through
- 126 -
Publication Release Date: Nov. 2000
PRELIMINARY
W83627SF
Revision 0.60