PIC18F6410-I/PT Microchip Technology, PIC18F6410-I/PT Datasheet - Page 89

• Manufacturer Part Number: PIC18F6410-I/PT
• Description: IC PIC MCU FLASH 8KX16 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F6410-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 16KB (8K x 16)
• Package / Case: 64-TFQFP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 54
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 768 B
• Interface Type: SPI/I2C/EUSART/AUSART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 54
• Number Of Timers: 4
• Operating Supply Voltage: 4.2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, ICE4000, DV164136, DM183032
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12-ch x 10-bit
• Package: 64TQFP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 40 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT64PT5 - SOCKET TRAN ICE 64MQFP/TQFPAC164319 - MODULE SKT MPLAB PM3 64TQFPDV007003 - PROGRAMMER UNIVERSAL PROMATE II
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

7.0
For PIC18FX310/X410 devices, the on-chip program
memory is implemented as read-only memory. It is
readable over the entire V
operation; it cannot be written to or erased. Reads from
program memory are executed one byte at a time.
PIC18F8410 devices also implement the ability to read,
write to and execute code from external memory
devices using the external memory interface. In this
implementation, external memory is used as all or part
of the program memory space. The operation of the
physical interface is discussed in
Memory
In all devices, a value written to the program memory
space does not need to be a valid instruction.
Executing a program memory location that forms an
invalid instruction results in a NOP.
7.1
To read and write to the program memory space, there
are two operations that allow the processor to move
bytes between the program memory space and the
data RAM: table read (TBLRD) and table write (TBLWT).
FIGURE 7-1:
 2010 Microchip Technology Inc.
PROGRAM MEMORY
Table Reads and Table Writes
Interface”.
Note 1: The Table Pointer register points to a byte in the program memory space.
Instruction: TBLRD*
Instruction: TBLWT*
TBLPTRU
TBLPTRU
2: Data is actually written to the memory location by the memory write algorithm. See
“Writing to Program Memory Space (PIC18F8310/8410 only)”
Table Pointer
Table Pointer
TABLE READ AND TABLE WRITE OPERATIONS
TBLPTRH TBLPTRL
TBLPTRH TBLPTRL
DD
Section 8.0 “External
range during normal
(1)
(1)
PIC18F6310/6410/8310/8410
Program Memory Space
Program Memory Space
The program memory space is 16 bits wide, while the
data RAM space is 8 bits wide. Table reads and table
writes move data between these two memory spaces
through an 8-bit register (TABLAT).
Table read operations retrieve data from program
memory and places it into the data RAM space. Table
write operations place data from the data memory
space on the external data bus. The actual process of
writing the data to the particular memory device is
determined by the requirements of the device itself.
Figure 7-1
program memory and data RAM.
Table operations work with byte entities. A table block
containing data, rather than program instructions, is not
required to be word-aligned. Therefore, a table block
can start and end at any byte address. If a table write is
being used to write executable code into an external
program memory, program instructions will need to be
word-aligned.
Note:
shows the table operations as they relate to
Although it cannot be used in PIC18F6310
devices in normal operation, the TBLWT
instruction is still implemented in the
instruction set. Executing the instruction
takes two instruction cycles, but effectively
results in a NOP.
The TBLWT instruction is available in
programming modes and is used during
In-Circuit Serial Programming (ICSP).
for more information.
Data Memory Space
Table Latch (8-bit)
Data Memory Space
Table Latch (8-bit)
TABLAT
TABLAT
Section 7.4
DS39635C-page 89
(2)