STEVAL-ISF001V1 STMicroelectronics, STEVAL-ISF001V1 Datasheet - Page 5

• Manufacturer Part Number: STEVAL-ISF001V1
• Description: BOARD EVAL FOR L6563/STW55NM60N
• Manufacturer: STMicroelectronics
• Type: MOSFET & Power Driverr

Specifications of STEVAL-ISF001V1

• Main Purpose: Power Management, Power Factor Correction
• Embedded: No
• Utilized Ic / Part: L6563
• Primary Attributes: 3 kW, 400 V Out, FOT(Fixed Off Time Control), 240 VAC (185 ~ 265 Vrms)
• Secondary Attributes: Iout Max 7.5 A
• Product: Power Management Modules
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: STW55NM60N
• Other names: 497-8850

UM0673
2
2.1
2.1.1
2.2
Safety and operating instructions
General
During assembly and operation the 3 kW FOT PFC board poses several inherent hazards
including bare wires and hot surfaces. If the board or its components are improperly used or
installed incorrectly, there is danger of serious personal injury and damage to property.
All operations involving transportation, installation and use, as well as maintenance is to be
carried out by skilled technical personnel (national accident prevention rules must be
observed). For the purposes of these basic safety instructions, "skilled technical personnel"
are suitably qualified people who are familiar with the installation, use, and maintenance of
power electronic systems.
This board must be used only in a power laboratory only by engineers and technicians who
are experienced in power electronics technology and under protection.
STMicroelectronics is not responsible for damages to property nor personal injury.
Power board 3 kW FOT PFC intended use
The power board 3 kW FOT PFC is designed for demonstration purposes only and shall not
be used for electrical installation or machinery. The technical data as well as information
concerning the supply conditions shall be taken from the documentation and strictly
observed.
Power board 3 kW FOT PFC installation
The installation and cooling of the 3 kW FOT PFC shall be in accordance with the
specifications and the targeted application (see
●
●
●
Excessive strain on the board shall be avoided. In particular, no components are to be
bent or isolating distances altered during the course of transportation or handling.
No contact shall be made with electronic components and contacts.
The boards contain electrostatically-sensitive components that are prone to damage
through improper use. Electrical components must not be mechanically damaged or
destroyed (to avoid potential health risks).
Warning:
Many sources of serious hazard are present on this board.
The board works directly from the mains, is not galvanically
isolated, and provides on the output high-voltage DC levels
that can be the cause of serious electrical shock, serious
burns or death. Hot surfaces that can cause burns are
present on the board.
Doc ID 15337 Rev 1
Section
Safety and operating instructions
2.2.2).
5/20