STEVAL-PCC010V1 STMicroelectronics, STEVAL-PCC010V1 Datasheet - Page 6

• Manufacturer Part Number: STEVAL-PCC010V1
• Description: BOARD EVAL FOR ST802RT1
• Manufacturer: STMicroelectronics

Specifications of STEVAL-PCC010V1

• Main Purpose: Interface, Ethernet Controller (PHY and MAC)
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: ST802RT1
• Primary Attributes: 1 Port, 100BASE-TX/10BASE-T
• Secondary Attributes: MII, RMII
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-10360

Features
1
1.1
1.2
1.3
6/58
Features
Physical layer
●
●
●
●
●
●
●
●
●
LED display
The ST802RT1x supports three configurable light emitting diode (LED) pins. The three
supported LED configurations are: link, speed, activity and collision. Functions are
multiplexed among the LEDs according to the LED mode selected through bit 9 of the
Auxiliary mode 2 register (RN1B[9]). Since these LED pins are also used as strap options,
the polarity of the LED is dependent on whether the pin is pulled up or down.
See
Package
●
Table 26
The ST802RT1x integrates the entire physical layer functions of 100Base-TX, 10Base-
T and 100Base-FX (B version only)
Optimized deterministic latency for real-time Ethernet operation
Provides full-duplex operation in both 100 Mbps and 10 Mbps modes
Provides auto-negotiation (NWAY) function of full/half-duplex operation for both 10 and
100 Mbps
Provides MLT-3 transceiver with DC restoration for base-line wander compensation
Provides transmit wave-shaper, receive filters, and adaptive equalizer
Provides loop-back modes for diagnostics
Built-in stream cipher scrambler/ de-scrambler and 4B/5B encoder/decoder
Supports external transformer with a turn ratio of 1.414:1
48-pin LQFP (7 x 7 mm.).
and paragraph
7.11
Doc ID 17049 Rev 1
for more details of LED mode selection.
ST802RT1A, ST802RT1B