EM357-MOD-LR-ANT-T Silicon Labs, EM357-MOD-LR-ANT-T Datasheet - Page 9

• Manufacturer Part Number: EM357-MOD-LR-ANT-T
• Description: Zigbee / 802.15.4 Modules EM357 Module, w/ PA /LNA, incl. antenna
• Manufacturer: Silicon Labs

Specifications of EM357-MOD-LR-ANT-T

• Rohs: yes
• Frequency Band: 2.4 GHz
• Data Rate: 500 Kbps
• Sensitivity: - 100 dBm
• Supply Current Transmitting: 31 mA
• Supply Current Receiving: 26 mA
• Maximum Operating Temperature: + 85 C
• Dimensions: 7.12 mm x 7.12 mm x 1 mm

EM35x Development Kit User Guide
2.5
The InSight Port is a cabled communication link between the ISA3 and the EM35x Module mounted on the
Breakout Board.
2.6
The Ember Development Kit contains two CDs for:
2.6.1 InSight Desktop
Installation components and associated documentation:
2.6.2 IAR Embedded Workbench
Licenses and support are provided separately and can be obtained from IAR Systems at http://www.iar.com.
2.7
Document 120-4031-000, EM35x Quick Start Guide, is shipped with the EM35x Development Kit. All other
documents listed below are available from Silicon Labs’ Ember support page (www.silabs.com/zigbee-support)
as Adobe PDF files or as on-line HTML help:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Hardware
Breakout Boards serve as test beds for network hardware and applications. Each Breakout Board has
an associated EM35x Module, which can be deployed as a node within a network application. Each
Breakout Board connects with an InSight Adapter (ISA3) through two communication links: the InSight
Port (ISP) and the DEI Port. This allows the Breakout Board’s EM35x Module to interface with InSight
Desktop (ISD) through the ISA’s InSight Port and its wired Ethernet connection. These interconnections
are described later in this chapter. The Breakout Boards also have a prototype breadboard area for
application-specific hardware development.
EM35x modules contain the Ember EM35x System-on-Chip (SoC) solution providing a complete radio
and microcontroller solution. All modules are pin-compatible, and they can be directly attached to a
Breakout Board.
InSight Adapters (ISA3s) each connect a Breakout Board to the Ethernet. Each adapter transmits
network data collected via its InSight Port and conveys it over its Ethernet connection to InSight
Desktop. It also picks up any messages or new software that is addressed to this Breakout Board.
InSight Port Cables connect each ISA3 to a Breakout Board.
AAA Battery Packs that attach to a Breakout Board enable deployment of battery-operated nodes.
USB Power Supply with Adapters power Breakout Boards and / or ISA3s from wall sockets.
Ethernet Cables connect ISA3s to an Ethernet subnet.
Data Emulation Interface (DEI) cables provide a peripheral interface connection between the ISA3 and
Breakout Board. The DEI cable supports UART functionality.
Software
InSight Desktop
IAR Embedded Workbench
EmberZNet PRO network stack library and APIs: debug and release builds (see Table 3-2)
HAL library
InSight Desktop
Sample programs (see Table 3-3)
Documentation
EM35x Development Kit User’s Guide (this document)
Application Development Fundamentals (120-3029-000)
120-4030-000E
2-3