EM357-MOD-LR-ANT-T Silicon Labs, EM357-MOD-LR-ANT-T Datasheet - Page 43

• Manufacturer Part Number: EM357-MOD-LR-ANT-T
• Description: Zigbee / 802.15.4 Modules EM357 Module, w/ PA /LNA, incl. antenna
• Manufacturer: Silicon Labs

Specifications of EM357-MOD-LR-ANT-T

• Rohs: yes
• Frequency Band: 2.4 GHz
• Data Rate: 500 Kbps
• Sensitivity: - 100 dBm
• Supply Current Transmitting: 31 mA
• Supply Current Receiving: 26 mA
• Maximum Operating Temperature: + 85 C
• Dimensions: 7.12 mm x 7.12 mm x 1 mm

EM35x Development Kit User Guide
8.6
The em3xx_load utility has the ability to program manufacturing tokens much like the em2xx_patch tool did. In
the case of the EM357, these tokens are contained in the Customer Information Block(CIB). For more
information on using the em3xx_load utility, refer to document 120-4032-000, EM3xx Utilities Guide.
8.6.1 Programming Certificates & Installation Codes
Certificates and installation codes can be programmed using the same em3xx_load tool that is used to program
other tokens. There is a separate application note which describes the process in detail. For more information,
see document 120-5058-000, Setting Manufacturing Certificates and Installation Codes.
8.7
1.
2.
3.
4.
5.
Programming Manufacturing Tokens
Using the Debugger in IAR Embedded Workbench with an Ember
InSight Adapter
Start IAR Embedded Workbench. Open the workspace (*.eww).
Select Project > Options. Select the Debugger > J-Link/J-Trace category. Select the Connection tab.
Select TCP/IP Communication and enter the IP address of the ISA3. Click OK.
Embedded Workbench is not able to program the flash on the EM357. Every time the project is re-
built, you must manually load it onto the EM357 (using em3xx_load.exe) before starting a debug
session.
Once the correct image has been loaded onto the EM357, select Project > Debug without Downloading
to start the debug session.
120-4030-000E
8-5