S9S08SG8E2VTG Freescale Semiconductor, S9S08SG8E2VTG Datasheet - Page 115

• Manufacturer Part Number: S9S08SG8E2VTG
• Description: 8-bit Microcontrollers - MCU 9S08 UC W/ 8K 0.25UM SGF
• Manufacturer: Freescale Semiconductor

Specifications of S9S08SG8E2VTG

• Rohs: yes
• Core: S08
• Processor Series: MC9S08SG8
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 40 MHz
• Program Memory Size: 8 KB
• Data Ram Size: 8 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 2.7 V to 5.5 V
• Operating Temperature Range: - 40 C to + 105 C
• Package / Case: TSSOP-16
• Mounting Style: SMD/SMT
• A/d Bit Size: 10 bit
• A/d Channels Available: 12
• Interface Type: SCI, SPI
• Maximum Operating Temperature: + 105 C
• Minimum Operating Temperature: - 40 C
• Number Of Programmable I/os: 16
• Number Of Timers: 2
• Program Memory Type: Flash
• Supply Voltage - Max: 5.5 V
• Supply Voltage - Min: 2.7 V

Chapter 8 
5-V Analog Comparator (S08ACMPV2)
8.1
The analog comparator module (ACMP) provides a circuit for comparing two analog input voltages or for
comparing one analog input voltage to an internal reference voltage. The comparator circuit is designed to
operate across the full range of the supply voltage (rail-to-rail operation).
Figure 8-1
8.1.1
When using the bandgap reference voltage for input to ACMP+, the user must enable the bandgap buffer
by setting BGBE =1 in SPMSC1 see
Register
8.1.2
S08ACMPV2 continues to operate in stop3 mode if enabled. If ACOPE is enabled, comparator output will
operate as in the normal operating mode and will control ACMPO pin. The MCU is brought out of stop
when a compare event occurs and ACIE is enabled; ACF flag sets accordingly.
8.1.3
The ACMP module can be configured to connect the output of the analog comparator to TPM1 input
capture channel 0 by setting ACIC in SOPT2. With ACIC set, the TPM1CH0 pin is not available externally
regardless of the configuration of the TPM1 module for channel 0.
Freescale Semiconductor
(SPMSC1)”. For value of bandgap voltage reference see
Introduction
shows the MC9S08SG8 block diagram with the ACMP module highlighted.
ACMP Configuration Information
ACMP in Stop3 Mode
ACMP/TPM Configuration Information
MC9S08SG8 MCU Series Data Sheet, Rev. 7
Section 5.7.6, “System Power Management Status and Control 1
Section A.6, “DC
Characteristics”.
111