LPC11U35FHI33/501, NXP Semiconductors, LPC11U35FHI33/501, Datasheet - Page 34

• Manufacturer Part Number: LPC11U35FHI33/501,
• Description: ARM Microcontrollers - MCU 32-bit ARM Cortex-M0 64KB Flash 12KB SRAM
• Manufacturer: NXP Semiconductors

Specifications of LPC11U35FHI33/501,

• Rohs: yes
• Core: ARM Cortex M0
• Processor Series: LPC11U3x
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 50 MHz
• Program Memory Size: 64 KB
• Data Ram Size: 12 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 1.8 V to 3.6 V
• Operating Temperature Range: - 40 C to + 85 C
• Package / Case: HVQFN-32
• Mounting Style: SMD/SMT
• Factory Pack Quantity: 490

NXP Semiconductors
[7]
[8]
[9]
[10] WAKEUP pin pulled HIGH externally. An external pull-up resistor is required on the RESET pin for the Deep power-down mode.
[11] Including voltage on outputs in 3-state mode.
[12] V
LPC11U3X
Product data sheet
[13] 3-state outputs go into 3-state mode in Deep power-down mode.
[14] Allowed as long as the current limit does not exceed the maximum current allowed by the device.
[15] To V
[16] Includes external resistors of 33 Ω ± 1 % on USB_DP and USB_DM.
USB_DP and USB_DM pulled LOW externally.
Low-current mode PWR_LOW_CURRENT selected when running the set_power routine in the power profiles.
IRC disabled; system oscillator enabled; system PLL enabled.
DD
SS
supply voltage must be present.
.
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 20 April 2012
32-bit ARM Cortex-M0 microcontroller
LPC11U3x
© NXP B.V. 2012. All rights reserved.
34 of 70