atmega3250v-8auatmega325v-8ai ATMEL Corporation, atmega3250v-8auatmega325v-8ai Datasheet - Page 265

• Manufacturer Part Number: atmega3250v-8auatmega325v-8ai
• Description: Atmega3250 8-bit Microcontroller With In-system Programmable Flash
• Manufacturer: ATMEL Corporation

27.2
2570L–AVR–08/07
Fuse Bits
Table 27-2.
Note:
The ATmega325/3250/645/6450 has three Fuse bytes.
the functionality of all the fuses and how they are mapped into the Fuse bytes. Note that the
fuses are read as logical zero, “0”, if they are programmed.
Table 27-3.
Note:
BLB1 Mode
Extended Fuse Byte
–
–
–
–
–
BODLEVEL1
BODLEVEL0
RSTDISBL
1
2
3
4
Memory Lock Bits
1. Program the Fuse bits and Boot Lock bits before programming the LB1 and LB2.
2. “1” means unprogrammed, “0” means programmed
1. See
2. Port G, PG5 is input only. Pull-up is always on.
(2)
75.
(1)
(1)
Lock Bit Protection Modes
Extended Fuse Byte
BLB12
Table 28-5 on page 300
1
1
0
0
Bit No
7
6
5
4
5
2
1
0
BLB11
1
0
0
1
Description
–
–
–
–
–
Brown-out Detector trigger level
Brown-out Detector trigger level
External Reset Disable
Protection Type
No restrictions for SPM or LPM accessing the Boot Loader
section.
SPM is not allowed to write to the Boot Loader section.
SPM is not allowed to write to the Boot Loader section,
and LPM executing from the Application section is not
allowed to read from the Boot Loader section. If Interrupt
Vectors are placed in the Application section, interrupts
are disabled while executing from the Boot Loader section.
LPM executing from the Application section is not allowed
to read from the Boot Loader section. If Interrupt Vectors
are placed in the Application section, interrupts are
disabled while executing from the Boot Loader section.
for BODLEVEL Fuse decoding.
(1)(2)
ATmega325/3250/645/6450
(Continued)
See “Alternate Functions of Port G” on page
Table 27-3
Default Value
1
1
1
1
1
1 (unprogrammed)
1 (unprogrammed)
1 (unprogrammed)
-
Table 27-5
describe briefly
265