lan83c175 Standard Microsystems Corp., lan83c175 Datasheet - Page 55

• Manufacturer Part Number: lan83c175
• Description: Ethernet Cardbus Integrated Controller With Modem Support Corporation
• Manufacturer: Standard Microsystems Corp.

D0 - CardBus TRANSMIT DMA DATA
LENGTH / CONTROL BITS
Reset Value: xxxxxxxxxxxxxxxxxxxx
This register contains the number of bytes
remaining in the current data buffer being read
by the transmit DMA. This register is a down
counter and is decremented by the number of
bytes copied each time data is read from the
buffer.
also be read and written through this I/O port.
31 through 22 - Unused.
21 - OWNER:
descriptor read was owned by the NIC (1) or
the host (0).
location. It may be written through the
PTSTAT register.
20 - LASTDESCR: Indicates that this is the
last descriptor for the current transmit frame
(Not used when FRAGLIST = 1).
19 - NOCRC:
generation for this packet when set.
18 - IAF: When set, interrupt after this frame
is transmitted.
17 - LFFORM:
indicates that the data length field comes
before the pointer in the fragment list. A 0
indicates that the pointer comes before the
data length.
The transmit DMA control bits may
This bit is read only at this
Fragment list format - a 1
Indicates whether the last
Disable automatic CRC
55
16 - FRAGLIST:
points to a fragment list.
15 through 0 - Buffer Length.
D4 - CardBus TRANSMIT FRAGMENT COUNT
Reset Value: XXXXXX
This register contains the number of fragments in
the current transmit DMA fragment list.
decremented just before each fragment is read.
31 through 6 - Unused.
5 through 0 - Fragment Count.
D8 -- CardBus TRANSMIT RAM CURRENT
ADDRESS
Reset Value: 00000000000
This register contains the byte address of the data
currently being accessed in the local transmit
RAM.
31 through 18 - Unused.
10 through 0 - RX RAM Address.
DC - EARLY TRANSMIT THRESHOLD
Reset Value: XXXXXXXXXXX
This register is programmed with the early
transmit
Transmission on the network will begin after the
number of bytes specified in this register have
been loaded into the local transmit RAM. Bits 1
and 0 are ignored, so the granularity of the
threshold is four bytes.
register will automatically be stored in the early
transmit count register at the same time. The
register should only be written at initialization
time.
31 through 11: Unused.
threshold
Indicates that this descriptor
for
Data written into this
the
LAN83C175.
It is