DSPIC30F6012A Microchip Technology Inc., DSPIC30F6012A Datasheet - Page 27

• Manufacturer Part Number: DSPIC30F6012A
• Description: Dspic30f6011a/6012a/6013a/6014a High-performance Digital Signal Controllers
• Manufacturer: Microchip Technology Inc.

3.0
3.1
The program address space is 4M instruction words. It
is addressable by a 24-bit value from either the 23-bit
PC, table instruction Effective Address (EA), or data
space EA, when program space is mapped into data
space as defined by Table 3-1. Note that the program
space address is incremented by two between succes-
sive program words in order to provide compatibility
with data space addressing.
© 2006 Microchip Technology Inc.
Note: This data sheet summarizes features of this group
of dsPIC30F devices and is not intended to be a complete
reference source. For more information on the CPU,
peripherals, register descriptions and general device
functionality, refer to the “dsPIC30F Family Reference
Manual” (DS70046). For more information on the device
instruction set and programming, refer to the “dsPIC30F/
33F Programmer’s Reference Manual” (DS70157).
MEMORY ORGANIZATION
Program Address Space
dsPIC30F6011A/6012A/6013A/6014A
Preliminary
User program space access is restricted to the lower
4M instruction word address range (0x000000 to
0x7FFFFE) for all accesses other than TBLRD/TBLWT,
which use TBLPAG<7> to determine user or configura-
tion space access. In Table 3-1, Program Space
Address Construction, bit 23 allows access to the
Device ID, the Unit ID and the configuration bits.
Otherwise, bit 23 is always clear.
Note:
The address map shown in Figure 3-1 and
Figure 3-2 is conceptual, and the actual
memory configuration may vary across
individual devices depending on available
memory.
DS70143C-page 25