71M6533G Maxim, 71M6533G Datasheet - Page 17

• Manufacturer Part Number: 71M6533G
• Description: The Teridian™ 71M6533 and 71M6534 are third-generation polyphase metering systems-on-chips (SoCs) with a 10MHz 8051-compatible MPU core, low-power RTC, flash, and LCD driver
• Manufacturer: Maxim

requires two Data RAM accesses. The second access is guaranteed to be available because the MPU
cannot access the XRAM on two consecutive instructions unless it is using the same address.
In addition to the reduction of wait states, this arrangement permits the MPU to easily use unneeded CE
data memory. Likewise, the amount of memory the CE uses is not limited by the size of a dedicated CE
data RAM.
The Data RAM is 32 bits wide and uses an external multiplexer so as to appear byte-wide to the MPU.
The Data RAM hardware will convert an MPU byte write operation into a read-modify-write operation that
1.3.5 CE Functional Overview
The ADC processes one sample per channel per multiplexer cycle.
samples taken during one multiplexer cycle (phases A, B, and C being processed). During an ALT
multiplexer sequence, missing samples are filled in by the CE.
The number of samples processed during one accumulation cycle is controlled by PRE_SAMPS[1:0] (I/O
RAM 0x2001[7:6]) and SUM_CYCLES[5:0] (I/O RAM 0x2001[5:0]). The integration time for each energy
output is:
For example, PRE_SAMPS[1:0] = 42 and SUM_CYCLES[5:0] = 50 will establish 2100 samples per accumulation
cycle. PRE_SAMPS[1:0] = 100 and SUM_CYCLES[5:0] = 21 will result in the exact same accumulation
cycle of 2100 samples or 833 ms. After an accumulation cycle is completed, the XFER_BUSY interrupt
signals to the MPU that accumulated data are available.
The end of each multiplexer cycle is signaled to the MPU by the CE_BUSY interrupt. At the end of each
multiplexer cycle, status information, such as sag data and the digitized input signal, is available to the MPU.
Rev 2
PRE_SAMPS[1:0] * SUM_CYCLES[5:0] / 2520.6, where 2520.6 is the sample rate in Hz
B
B
IA
IA
1/2520.6Hz = 397µs
1/2520.6Hz = 397µs
Figure 5: Samples from Multiplexer Cycle
VA
VA
VB
VB
IB
IB
IC
IC
VC
VC
13/32768Hz = 397µs
13/32768Hz = 397µs
per mux cycle
per mux cycle
2/32768Hz =
2/32768Hz =
61.04µs
61.04µs
A
A
Figure 5
C
C
shows the timing of the
17