SC16C554IB64,151 NXP Semiconductors, SC16C554IB64,151 Datasheet - Page 12

• Manufacturer Part Number: SC16C554IB64,151
• Description: IC UART QUAD SOT314-2
• Manufacturer: NXP Semiconductors

Specifications of SC16C554IB64,151

• Number Of Channels: 4, QUART
• Fifo's: 16 Byte
• Voltage - Supply: 2.5V, 3.3V, 5V
• With Auto Flow Control: Yes
• With Irda Encoder/decoder: Yes
• With False Start Bit Detection: Yes
• With Modem Control: Yes
• With Cmos: Yes
• Mounting Type: Surface Mount
• Package / Case: 64-LQFP
• Transmit Fifo: 16Byte
• Receive Fifo: 16Byte
• Transmitter And Receiver Fifo Counter: Yes
• Data Rate: 5Mbps
• Package Type: LQFP
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 4.5V
• Mounting: Surface Mount
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 935270074151; SC16C554IB64-S; SC16C554IB64-S

Philips Semiconductors
Table 2:
9397 750 13132
Product data
Symbol
RXA, RXB,
RXC, RXD
RXRDY
TXA, TXB,
TXC, TXD
TXRDY
V
XTAL1
XTAL2
CC
Pin description
Pin
PLCC68 LQFP64 LQFP80
7, 29,
41, 63
38
17, 19,
51, 53
39
13, 30,
47, 64
35
36
62, 20,
29, 51
-
8, 10,
39, 41
-
4, 21,
35, 52
25
26
…continued
17, 44,
57, 4
54
29, 32,
69, 72
55
5, 25,
45, 65
50
51
Quad UART with 16-byte FIFO and infrared (IrDA) encoder/decoder
Type
I
O
O
O
I
I
O
Rev. 05 — 10 May 2004
Description
Receive data input RXA-RXD. These inputs are associated with
individual serial channel data to the SC16C554/554D. The RX signal
will be a logic 1 during reset, idle (no data), or when the transmitter is
disabled. During the local loop-back mode, the RX input pin is
disabled and TX data is connected to the UART RX input internally.
Receive Ready (Active-LOW). RXRDY contains the wire-ORed
status of all four receive channel FIFOs, RXRDYA-RXRDYD. A
logic 0 indicates receive data ready status, i.e., the RHR is full, or the
FIFO has one or more RX characters available for unloading. This
pin goes to a logic 1 when the FIFO/RHR is empty, or when there are
no more characters available in either the FIFO or RHR. Individual
channel RX status is read by examining individual internal registers
via CS and A0-A4 pin functions.
Transmit data A, B, C, D. These outputs are associated with
individual serial transmit channel data from the SC16C554/554D.
The TX signal will be a logic 1 during reset, idle (no data), or when
the transmitter is disabled. During the local loop-back mode, the TX
output pin is disabled and TX data is internally connected to the
UART RX input.
Transmit Ready (Active-LOW). TXRDY contains the wire-ORed
status of all four transmit channel FIFOs, TXRDYA-TXRDYD. A
logic 0 indicates a buffer ready status, i.e., at least one location is
empty and available in one of the TX channels (A-D). This pin goes to
a logic 1 when all four channels have no more empty locations in the
TX FIFO or THR. Individual channel TX status can be read by
examining individual internal registers via CS and A0-A4 pin
functions.
Power supply inputs.
Crystal or external clock input. Functions as a crystal input or as
an external clock input. A crystal can be connected between this pin
and XTAL2 to form an internal oscillator circuit (see
Alternatively, an external clock can be connected to this pin to
provide custom data rates. (See
rate
Output of the crystal oscillator or buffered clock. (See also
XTAL1.) Crystal oscillator output or buffered clock output.
generator”.)
SC16C554/554D
Section 6.10 “Programmable baud
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Figure
7).
12 of 55