PSB 21373 H V1.1 Infineon Technologies, PSB 21373 H V1.1 Datasheet - Page 197

• Manufacturer Part Number: PSB 21373 H V1.1
• Description: IC SPEECH AND VOICE MQFP-44
• Manufacturer: Infineon Technologies
• Series: SCOUT™r

Specifications of PSB 21373 H V1.1

• Function: CODEC
• Interface: IOM-2, SCI
• Number Of Circuits: 1
• Voltage - Supply: 5V
• Current - Supply: 97.5mA
• Mounting Type: Surface Mount
• Package / Case: 44-BQFP
• Includes: Activation and Deactivation, Channel Handler, DTMF / Tone / Ringing Generator, HDLC Controller, Speakerphone, Voice Monitoring
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power (watts): -
• Operating Temperature: -
• Other names: PSB21373HV1.1XT; PSB21373HV11XT; SP000007602

Data Sheet
TSS
Selects one of the 12 timeslots from 0...11 on the IOM-2 interface for the data channels.
7.3.3
Value after reset: See table below
CDAx_
CR
Register
CDA1_CR
CDA2_CR
EN_TBM
0: The TIC bus monitoring is disabled
1: The TIC bus monitoring with the CDAx0 register is enabled. The TSDPx0 register
EN_I1, EN_I0
0: The input of the CDAx0, CDAx1 register is disabled
1: The input of the CDAx0, CDAx1 register is enabled
EN_O1, EN_O0 ... Enable Output CDAx0, CDAx1
0: The output of the CDAx0, CDAx1 register is disabled
1: The output of the CDAx0, CDAx1 register is enabled
SWAP
0: The time slot and data port for the input of the CDAxy register is defined by its own
1: The input (time slot and data port) of the CDAx0 is defined by the TSDP register of
must be set to 08
TSDPxy register. The data port for the CDAxy input is vice versa to the output setting
for CDAxy.
CDAx1 and the input of CDAx1 is defined by the TSDP register of CDAx0. The data
port for the CDAx0 input is vice versa to the output setting for CDAx1. The data port
for the CDAx1 input is vice versa to the output setting for CDAx0. The input definition
for time slot and data port CDAx0 are thus swapped to CDAx1 and for CDAx1 to
CDAx0. The outputs are not affected by the SWAP bit.
CDAx_CR - Control Register Controller Data Access CH1x
7
0
... Timeslot Selection
... Enable TIC Bus Monitoring
... Enable Input CDAx0, CDAx1
... Swap Inputs
H
for monitoring from DU or 88
0
Value after Reset
00
00
H
H
TBM
EN_
EN_I1 EN_I0 EN_O1 EN_O0 SWAP
197
H
for monitoring from DD respectively.
Register Address
4E
4F
H
H
0
PSB 21373
2002-05-13
(4E
RD/WR
H
-4F
H
)