DS2152L+ Maxim Integrated Products, DS2152L+ Datasheet - Page 27

• Manufacturer Part Number: DS2152L+
• Description: IC TXRX T1 1CHIP ENHNCD 100-LQFP
• Manufacturer: Maxim Integrated Products

Specifications of DS2152L+

• Function: Single-Chip Transceiver
• Interface: T1
• Number Of Circuits: 1
• Voltage - Supply: 4.75 V ~ 5.25 V
• Current - Supply: 75mA
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: *
• Includes: DSX-1 and CSU Line Build-Out Generator, HDLC Controller, In-Band Loop Code Generator and Detector
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power (watts): -

CCR4: COMMON CONTROL REGISTER 4 (Address = 11 Hex)
SYMBOL
(MSB)
RSRE
RFSA1
RPCSI
TPCSI
TIRFS
RSRE
THSE
RFE
RFF
RPCSI
POSITION
CCR4.7
CCR4.6
CCR4.5
CCR4.4
CCR4.3
CCR4.2
CCR4.1
CCR4.0
RFSA1
NAME AND DESCRIPTION
Receive Side Signaling Reinsertion Enable. See Section
details.
0 = do not re-insert signaling bits into the data stream presented at the
RSER pin
1 = re-insert the signaling bits into data stream presented at the RSER
pin
Receive Per-Channel Signaling Insert. See Section
details.
0 = do not use RCHBLK to determine which channels should have
signaling re-inserted
1 = use RCHBLK to determine which channels should have signaling
re-inserted
Receive Force Signaling All 1s. See Section
0 = do not force extracted robbed-bit signaling bit positions to a 1
1 = force extracted robbed-bit signaling bit positions to a 1
Receive Freeze Enable. See Section
0 = no freezing of receive signaling data will occur
1 = allow freezing of receive signaling data at RSIG (and RSER if
CCR4.7 = 1).
Receive Force Freeze. Freezes receive side signaling at RSIG (and
RSER if CCR4.7 = 1); will override Receive Freeze Enable (RFE). See
Section
0 = do not force a freeze event
1 = force a freeze event
Transmit Hardware Signaling Insertion Enable. See Section
details.
0 = do not insert signaling from the TSIG pin into the data stream
presented at the TSER pin
1 = insert the signaling from the TSIG pin into data stream presented at
the TSER pin
Transmit Per-Channel Signaling Insert. See Section
0 = do not use TCHBLK to determine which channels should have
signaling inserted from TSIG
1 = use TCHBLK to determine which channels should have signaling
inserted from TSIG
Transmit Idle Registers (TIR) Function Select. See Section
timing details.
0 = TIRs define in which channels to insert idle code
1 = TIRs define in which channels to insert data from RSER (i.e., Per-
Channel Loopback function)
8.2
RFE
for details.
27 of 97
RFF
THSE
8.2
for details.
8.2
for more details.
TPCSI
8.2
8.2
for details.
for more
TIRFS
(LSB)
8.2
8.2
9
for
for
for