MT18HTS25672RHZ-80EH1 Micron Technology Inc, MT18HTS25672RHZ-80EH1 Datasheet - Page 15

• Manufacturer Part Number: MT18HTS25672RHZ-80EH1
• Description: MODULE DDR2 SDRAM 2GB 200SORDIMM
• Manufacturer: Micron Technology Inc
• Series: -r

Specifications of MT18HTS25672RHZ-80EH1

• Memory Type: DDR2 SDRAM
• Memory Size: 2GB
• Speed: 800MT/s
• Features: -
• Package / Case: 200-SORDIMM
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

SM Bus Slave Subaddress Decoding
PDF: 09005aef83f287c1
hts18c256x72rhz.pdf - Rev. A 3/10 EN
The interrupt mode enables software to reset EVENT# after a critical temperature thresh-
old has been detected. Threshold points are set in the configuration register by the user.
This mode triggers the critical temperature limit and both the MIN and MAX of the tem-
perature window.
The compare mode is similar to the interrupt mode, except EVENT# cannot be reset by
the user and only returns to the logic HIGH state when the temperature falls below the
programmed thresholds.
Critical temperature mode triggers EVENT# only when the temperature has exceeded
the programmed critical trip point. When the critical trip point has been reached, the
temperature sensor goes into comparator mode, and the critical EVENT# cannot be
cleared through software.
The temperature sensor’s physical address differs from the SPD EEPROM’s physical ad-
dress: binary 0011 for A0, A1, A2, and RW#, where A2, A1, and A0 are the three slave
subaddress pins and the RW# bit is the READ/WRITE flag.
If the slave base address is fixed for the temperature sensor/SPD EEPROM, then the
pins set the subaddress bits of the slave address, enabling the devices to be located any-
where within the eight slave address locations. For example, they could be set from 30h
to 3Eh.
Temperature Sensor with Serial Presence-Detect EEPROM
2GB (x72, ECC, DR) 200-Pin DDR2 SDRAM SORDIMM
15
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2010 Micron Technology, Inc. All rights reserved.