F3SJ-A0870P30 Omron, F3SJ-A0870P30 Datasheet - Page 65

• Manufacturer Part Number: F3SJ-A0870P30
• Description: F3SJ-A Safety Light Curtain, 30mm Resolution, 870 Mm Protected Height
• Manufacturer: Omron

Safety Precautions
This catalog is intended as a guide for product selection. Be sure to use the instruction manual provided with the product for actual operation.
Regulations and Standards
1. Application of an F3SJ-A sensor alone cannot receive type
2. The F3SJ-A is electro-sensitive protective equipment (ESPE) in
3. The F3SJ-A complies with the following legislation and standards:
4. The F3SJ-A received the following certification from the EU-
5. The F3SJ-A has received certificates of UL listing for US and
6. The F3SJ-A is designed according to the standards listed below.
certification provided by Article 44-2 of the Labour Safety and
Health Law of Japan. It is necessary to apply it in a system.
Therefore, when using the F3SJ-A in Japan as a "safety system for
pressing or shearing machines" prescribed in Article 42 of that law,
the system must receive type certification.
accordance with European Union (EU) Machinery Directive Index
Annex IV, B, Safety Components, Item 1.
1. EU Regulations
2. European standards:
3. International standards:
4. JIS standards:
accredited body, TÜV SÜD:
• EC type test based on machinery directive
• TÜV SÜD Type Certification
• SIL1, 2, 3 (EN61508-1 to -7)
Canadian safety standards from the Third Party Assessment Body
UL.
• Type 4 ESPE (UL61496-1),
To make sure that the final system complies with the following
standards and regulations, you are asked to design and use it in
accordance with all other related standards, laws, and regulations.
If you have any questions, consult with specialized organizations
such as the body responsible for prescribing and/or enforcing
machinery safety regulations in the location where the equipment
is to be used.
• European Standards: EN415-4, EN692, EN693
• US Occupational Safety and Health Administration: OSHA 29
• US Occupational Safety and Health Administration: OSHA 29
• American National Standard Institute: ANSI B11.1 to B11.19
• American National Standard Institute ANSI/RIA 15.06
• Canadian Standards Association CSA Z142, Z432, Z434
• SEMI standard SEMI S2
Type 4 ESPE (EN61496-1),
Type 4 AOPD(prEN61496-2)
Type 4 ESPE (EN61496-1),
Type 4 AOPD (prEN61496-2),
Application: EN954-1 categories B, 1, 2, 3, 4
Type 4 AOPD (UL61496-2)
CFR 1910.212
CFR 1910.217
Machinery Directive: Directive 98/37/EC
EMC Directive: Directive 2004/108/EC
EN61496-1 (TYPE 4 ESPE),
prEN61496-2 (TYPE 4 AOPD),
EN61508-1 to -7 (SIL3)
IEC61496-1 (TYPE 4 ESPE),
IEC61496-2 (TYPE 4 AOPD),
EN61508-1 to -7 (SIL3)
JIS B9704-1 (TYPE 4 ESPE),
JIS B9704-2 (TYPE 4 AOPD)
Precautions for Safe Use
Indication and meaning for safe use
Meanings of Signal Words
To ensure safe use of the F3SJ-A, signal words and an alert symbol
are used in this catalog to indicate safety-related instructions.
Because these instructions describe details very important to your
safety, it is extremely important that you understand and follow the
instructions. The signal words and alert symbol used in this catalog
are shown below.
Indicates a potentially hazardous situation which, if not avoided, will
result in minor or moderate injury, or may result in serious injury or
death. Additionally, there may by significant property damage.
Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury or in property damage.
Definition of Symbol
Warning Labels
For users
The FS3J must be installed, set, and integrated into the mechanical
control system by a qualified technician who has received the
appropriate training. Failure to make correct settings may prevent
detection of people and result in serious injury.
When changing parameters with a setting tool (F39-GWUM or F39-
MC21), the change must be made and the contents of the change
must be managed by the person in charge of the system.
Unintentional or mistaken parameter changes may prevent detection
of people and result in serious injury.
For machines
Do not use this sensor for machines that cannot possibly be stopped
by electrical control. For example, do not use it for a pressing machine
that uses full-rotation clutch. Otherwise, the machine may not stop
before a person reaches the hazardous part, resulting in serious
injury.
Do not use the auxiliary output or external indicator output for safety
applications. Failure of the F3SJ may cause a person to go
undetected, resulting in serious injury.
Prohibited
Indicates a prohibited action.
!WARNING
!WARNING
!WARNING
!CAUTION
F3SJ Ver.2
65