F3SJ-A0870P30 Omron, F3SJ-A0870P30 Datasheet - Page 29

• Manufacturer Part Number: F3SJ-A0870P30
• Description: F3SJ-A Safety Light Curtain, 30mm Resolution, 870 Mm Protected Height
• Manufacturer: Omron

Nomenclature
Main Unit and Cables
Emitter, receiver
Extension
cable
Single-end connector cable
Double-end connector cable
Component
Emitter
Power cable
(Gray)
F3SJ-A@@@@P@@
or
F3SJ-A@@@@N@@
F39-JC@A
F39-JC@B
Indicator
Extension cable
Beam
Cap
Model
Beam center-line mark
(A line indicates where the beam is
aligned. This line indicates the
reference line used to measure the
safety distance.)
Select a type name based on the required protective height and
detection capability.
(Cap and power cable are included)
The type name can be understood as follows:
F3SJ-A@@@@P@@-@
1: Protective height (mm)
2: Output type (P=PNP output type, N=NPN output type)
3: Diameter of detection capability (mm)
4: L is emitter, D is receiver, and a blank is emitter/receiver set.
This extension cable is used to connect to a terminal block controller
(e.g. F3SX, G9SA, G9SB, G9SX) or to a safety processing system
(e.g. DeviceNet safety).
This extension cable is used when the length of the connection cable
is insufficient, or when connecting to an F3SP-B1P controller. The
length can be specified.
Receiver
For models with fixed auto reset, the suffix "-L-TS" is an emitter,
"-D-TS" is a receiver, and "-TS" is an emitter/receiver set.
Power cable (Black)
1
To attach or detach the cap
and power cable, remove
the 4 screws shown above.
2 3 4
Description
F3SJ Ver.2
29