PIC24F04KA200T-I/ST Microchip Technology, PIC24F04KA200T-I/ST Datasheet - Page 10

• Manufacturer Part Number: PIC24F04KA200T-I/ST
• Description: PIC24F Core, 4KB Flash, 512B RAM, 3V, Deep Sleep, 10-bit 500ksps ADC, CTMU, UART
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 24Fr

Specifications of PIC24F04KA200T-I/ST

• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 32MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 12
• Program Memory Size: 4KB (1.375K x 24)
• Program Memory Type: FLASH
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 14-TSSOP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PIC24F04KA201 FAMILY
The internal oscillator block also provides a stable
reference source for the Fail-Safe Clock Monitor
(FSCM). This option constantly monitors the main clock
source against a reference signal provided by the
internal oscillator and enables the controller to switch to
the internal oscillator, allowing for continued low-speed
operation or a safe application shutdown.
1.1.4
Regardless of the memory size, all the devices share
the same rich set of peripherals, allowing for a smooth
migration path as applications grow and evolve.
The consistent pinout scheme used throughout the
entire family also helps in migrating to the next larger
device. This is true when moving between devices with
the same pin count, or even jumping from 14-pin to
20-pin devices. The PIC24F16KA102 family is directly
compatible for migration to larger program and data
memory.
The PIC24F family is pin compatible with devices in the
dsPIC33 family, and shares some compatibility with the
pinout schema for PIC18 and dsPIC30. This extends
the ability of applications to grow from the relatively
simple, to the powerful and complex.
1.2
• Communications: The PIC24F04KA201 family
• 10-Bit A/D Converter: This module incorporates
• Charge Time Measurement Unit (CTMU)
DS39937B-page 8
incorporates a range of serial communication
peripherals to handle a range of application
requirements. There is an I
supports both the Master and Slave modes of
operation. It also comprises a UART with built-in
IrDA
programmable acquisition time, allowing for a
channel to be selected and a conversion to be
initiated without waiting for a sampling period, and
faster sampling speed. The 16-deep result buffer
can be used either in Sleep to reduce power, or in
Active mode to improve throughput.
Interface: The PIC24F04KA201 family includes
the new CTMU interface module, which can be
used for capacitive touch sensing using
Microchip’s mTouch™ technology, proximity
sensing and also for precision time measurement
and pulse generation.
®
encoders/decoders and an SPI module.
Other Special Features
EASY MIGRATION
2
C™ module that
Preliminary
The PIC24F04KA201 family architecture is very similar to
1.3
Devices in the PIC24F04KA201 family are available in
14-pin and 20-pin packages. The general block
diagram for all devices is displayed in Figure 1-1.
The devices are different from each other in two ways:
1.
2.
All other features for devices in this family are identical;
these are summarized in Table 1-1.
A
PIC24F04KA201 family devices, sorted by function, is
provided in Table 1-2.
1.4
that of the PIC24F16KA102 family. The PIC24F04KA201
family is a subset of the PIC24F16KA102 devices.
The
additional features:
• Larger Program Memory
• Larger Data Memory
• CRC Module
• Debugging Capabilities through ICSP™
• Additional I/O on 20-Pin Devices (up to
• Data EEPROM memory
• Boot Segment and General Segments for
• One Additional UART (2 total)
Note:
24 I/O pins)
Program Code (with available code protection)
list
Number of ADC channels (9 channels on 20-pin
parts, 7 channels on 14-pin parts).
Available I/O pins and ports (12 pins on two
ports for 14-pin devices and 18 pins on two ports
for 20-pin devices).
PIC24F16KA102
Details on Individual Family
Members
of
Differences from PIC24F16KA102
Family
Table 1-1 provides the pin location of
individual peripheral features and not how
they are multiplexed on the same pin. This
information is provided in the pinout
diagrams on pages 2 and 3 of the data
sheet. Multiplexed features are sorted by
the priority given to a feature, with the
highest priority peripheral being listed first.
the
pin
© 2009 Microchip Technology Inc.
features
family
has
available
the
following
on
the