PIC16F1526T-I/PT Microchip Technology, PIC16F1526T-I/PT Datasheet - Page 185

• Manufacturer Part Number: PIC16F1526T-I/PT
• Description: 64-pin, 14KB Flash, 768B RAM, 10-bit ADC, 10xCCP, 2xSPI, 2xMI2C, 2xEUSART, 2.3V-
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16F1526T-I/PT

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 54
• Program Memory Size: 14KB (8K x 14)
• Program Memory Type: FLASH
• Eeprom Size: -
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 2.3 V ~ 5.5 V
• Data Converters: A/D 30x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TQFP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

20.1.4
There are four prescaler settings specified by the
CCPxM<3:0> bits of the CCPxCON register. Whenever
the CCP module is turned off, or the CCP module is not
in Capture mode, the prescaler counter is cleared. Any
Reset will clear the prescaler counter.
Switching from one capture prescaler to another does not
clear the prescaler and may generate a false interrupt. To
avoid this unexpected operation, turn the module off by
clearing the CCPxCON register before changing the
prescaler.
perform this function.
EXAMPLE 20-1:
20.1.5
Capture mode depends upon the Timer1/3/5 module for
proper operation. There are two options for driving the
Timer1/3/5 module in Capture mode. It can be driven by
the instruction clock (F
source.
When Timer1/3/5 is clocked by F
not increment during Sleep. When the device wakes from
Sleep, Timer1/3/5 will continue from its previous state.
Capture mode will operate during Sleep when
Timer1/3/5 is clocked by an external clock source.
 2011 Microchip Technology Inc.
BANKSEL CCPxCON
CLRF
MOVLW
MOVWF
CCPxCON
NEW_CAPT_PS ;Load the W reg with
CCPxCON
Equation 20-1
CCP PRESCALER
CAPTURE DURING SLEEP
CHANGING BETWEEN
CAPTURE PRESCALERS
OSC
;Set Bank bits to point
;to CCPxCON
;Turn CCP module off
;the new prescaler
;move value and CCP ON
;Load CCPxCON with this
;value
demonstrates the code to
/4), or by an external clock
OSC
/4, Timer1/3/5 will
Preliminary
20.1.6
This module incorporates I/O pins that can be moved to
other locations with the use of the alternate pin function
register, APFCON. To determine which pins can be
moved and what their default locations are upon a
Reset, see
more information.
PIC16(L)F1526/27
Section 12.1 “Alternate Pin Function”
ALTERNATE PIN LOCATIONS
DS41458B-page 185
for