KS8993F A5 Micrel Inc, KS8993F A5 Datasheet - Page 12

• Manufacturer Part Number: KS8993F A5
• Manufacturer: Micrel Inc

Specifications of KS8993F A5

• Number Of Primary Switch Ports: 3
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 1.8/2.5/3.3V
• Fiber Support: Yes
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII/SNI
• Power Supply Type: Analog/Digital
• Package Type: PQFP
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 70C
• Operating Temperature (min): 0C
• Pin Count: 128
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 1.89/3.465V
• Operating Temperature Classification: Commercial
• Lead Free Status / RoHS Status: Not Compliant

KS8993F
August 26, 2004
Pin #
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Pin Name
P1LPBM
P2LED3
DGND
VDDC / VOUT_1V8
LEDSEL1
NC
P1LED3
NC
HWPOVR
P2MDIXDIS
P2MDIX
P1ANEN
P1SPD
P1DPX
P1FFC
Type
Ipd
Opd
Gnd
Pwr
I
O
O
O
Ipd
Ipd
Ipd
Ipu
Ipd
Ipd
Ipd
pd
pd
pd
pd
Description
1 = Drop OAM frames and Ethernet frames with the following errors –
CRC,
0 = Drop OAM frames only. Loop back all Ethernet frames including those
0 = perform MC loop back at MAC of port 2
1 = reserve. Do not use.
Port 2 LED Indicator
See description in pin# (4).
Digital ground
VDDC : For KS8993F, this is an input power pin for the 1.8V digital
VOUT_1V8 : For KS8993FL, this is an 1.8V output power pin to
LED display mode select
See description in pin# (1,4).
Reserved
Port 1 LED Indicator
See description in pin# (1).
Reserved
Hardware Pin Overwrite
Port 2 auto MDI/MDI-X
Port 2 MDI/MDI-X setting when auto MDI/MDI-X is disabled
1 = enable auto negotiation on port 1
0 = disable auto negotiation on port 1
1 = Force port 1 to 100BT if P1ANEN = 0.
0 = Force port 1 to 10BT if P1ANEN = 0.
1 = port 1 default to full duplex mode if P1ANEN = 1 and auto negotiation
0 = port 1 default to half duplex mode if P1ANEN = 1 and auto negotiation
1 = always enable (force) port 1 flow control feature
0 = port 1 flow control feature enable is determined by auto negotiation
undersize, oversize. Loop back Ethernet frames with only good CRC
and valid length.
with errors.
Note: Internal pull down is weak; it will not turn ON the LED.
Note: An external 1K pull down is needed on this pin if it is connected
0 = Disable. All strap-in pins configurations are overwritten by the
1 = Enable. All strap-in pins configurations are overwritten by the
0 = enable (default)
1 = disable
0 = MDI-X (default), {transmit on TXP2/TXM2 pins}
1 = MDI, {transmit on RXP2/RXM2 pins}
fails. Force port 1 in full duplex mode if P1ANEN = 0.
fails. Force port 1 in half duplex mode if P1ANEN = 0.
EEPROM configuration data.
EEPROM configuration data, except for P2ANEN (pin 13), P2SPD
(pin 14), P2DPX (pin 15) and ML_EN (pin 34).
core VDD.
to a LED.
supply the KS8993FL’s input power pins: VDDAP
(pin 63), VDDC (pins 91, 123) and VDDA (pins 38, 43, 57).
- 12 -
Revision 1.0
Micrel