LAN9311I-NZW Standard Microsystem (Smsc), LAN9311I-NZW Datasheet - Page 184

• Manufacturer Part Number: LAN9311I-NZW
• Manufacturer: Standard Microsystem (Smsc)

Specifications of LAN9311I-NZW

• Package: 128XVTQFP
• Phy/transceiver Interface: MII
• Number Of Primary Switch Ports: 2
• Maximum Data Rate: 100 Mbps
• Internal Memory Buffer Size: 32 KB
• Vlan Support: Yes
• Power Supply Type: Analog
• Minimum Single Supply Voltage: 3 V
• Maximum Single Supply Voltage: 3.6 V
• Maximum Supply Current: 0.295 A
• Maximum Power Dissipation: 1070 mW

Revision 1.7 (06-29-10)
14.2.2.3
BITS
30:0
31
RX Data FIFO Fast Forward (RX_FFWD)
Writing a 1 to this bit causes the RX Data FIFO to fast-forward to the start
of the next frame. This bit will remain high until the RX Data FIFO fast-
forward operation has completed. No reads should be issued to the RX Data
FIFO while this bit is high.
Note:
RESERVED
Receive Datapath Control Register (RX_DP_CTRL)
This register is used to discard unwanted receive frames.
Please refer to section
Forward," on page 135
of RX_FFWD.
Offset:
078h
DESCRIPTION
Section 9.9.1.1, "Receive Data FIFO Fast
for detailed information regarding the use
DATASHEET
184
Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Size:
32 bits
TYPE
R/W
SMSC LAN9311/LAN9311i
RO
SC
DEFAULT
Datasheet
0h
-