CDK5560 Cirrus Logic Inc, CDK5560 Datasheet - Page 5

• Manufacturer Part Number: CDK5560
• Description: KIT - CDB5560 W/ Capture Plus II System
• Manufacturer: Cirrus Logic Inc
• Series: CapturePLUS™IIr

Specifications of CDK5560

• Number Of Adc's: 1
• Number Of Bits: 24
• Sampling Rate (per Second): 50k
• Data Interface: Serial
• Inputs Per Adc: 1 Differential
• Input Range: ±3 V
• Power (typ) @ Conditions: 90mW @ 2.5 V
• Voltage Supply Source: Dual ±
• Operating Temperature: -40°C ~ 85°C
• Utilized Ic / Part: CS5560
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 598-1277; CDK5560-1

3. HARDWARE SETUP
The following section describes the connections between the Cirrus Logic evaluation board and the Cap-
turePlus II system. It then describes the connections between the CapturePlus II system and the PC.
DS789UM2
1. Plug the ADC evaluation board into the connectors on the top of the CDBXC2S50 board.
2. Connect the USB cable between the CapturePlus II USB connector and the PC USB port.
3. With the CapturePlus II system power switch in the OFF position, plug the brick power supply into the
4. Connect the
5. Slide the CapturePlus II system power switch to the ON position. Press and release the Reset (/POR)
6. Turn on the power supplies connected to the evaluation board.
7. Start the CapturePlus II software.
CapturePlus II system. Plug the power supply into a 100-240 VAC, 50/60 Hz, 1.0 A outlet.
switch, S3.
Analog
Source
Signal
required power supplies to the appropriate connectors on the
Associated Analog Circuitry
Evaluation Board
External Power
(Not Included)
Cirrus Logic
Supplies
ADC &
Digital Outputs
Digital Inputs
Data Capture Hardware
Included Power
CapturePlus II
Supply
Serial Port
USB Port
Running CapturePlus II
IBM-compatible PC
Software
evaluation board.
CapturePlus II
5