CQM1-CIF01 Omron, CQM1-CIF01 Datasheet - Page 94

• Manufacturer Part Number: CQM1-CIF01
• Description: PERIPHERAL CABLE FOR NEC COMP.
• Manufacturer: Omron

Specifications of CQM1-CIF01

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Setting and Changing Communications Specifications
6-2-2
Connecting to PLCs on Networks
On the project workspace, move the cursor on the PLC to which the applica-
ble Position Control Unit has been registered and right-click it. Select Proper-
ties from the menu.
Change the setting, if needed, and click the OK Button. For details of transfer-
ring, verifying, and writing to the flash memory, see 6-3 Downloading Data, 6-
4 Uploading Data, 6-5 Verifying Data, 6-6 Writing Data to Flash Memory.
This section explains the setting method to establish communications with
PLCs on networks. By this setting, it becomes possible to use data created or
set with CX-Position for the Position Control Units mounted on the PLC in a
network. Additionally, all the online functions such as transferring, verifying,
writing to the flash memory, monitoring, etc. of data on Position Control Units
can be executed for a Position Control Unit on a network.
The setting method to establish communications with the PLC on a network
will be explained using the following system configuration example.
The CX-Position is connected online to PLC100 on the network through
PLC000. The network type Toolbus is used.
In this example, PLC000 has been registered in the project. Network settings
are performed when adding PLC100 to the project.
Toolbus or
Host Link
ror (timeout) may occur. In this case, increase the value set for the re-
sponse timeout in the network settings.
CX-Position
Device name: PLC000
Device type:
Node address: 0
Network (e.g., Controller Link)
CS1H
Device name: PLC100
Device type:
Node address: 1
NC Unit
CS1H-H
Section 6-2
73