CQM1-CIF01 Omron, CQM1-CIF01 Datasheet - Page 72

• Manufacturer Part Number: CQM1-CIF01
• Description: PERIPHERAL CABLE FOR NEC COMP.
• Manufacturer: Omron

Specifications of CQM1-CIF01

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Setting Editing Windows
Zone (X/Y/Z/U Axes: Zone
0 to Zone 2)
4-2
Setting Editing Windows
Note
Note Refer to SECTION 5 Saving and Reading Projects for information on opening
Only the X-axis settings are used for the CS1W-NC113/133 and CJ1W-
NC113/133, and only the X- and Y-axis settings are used for the CS1W-
NC213/233 and CJ1W-NC213/233. Settings can be entered and displayed in
either hexadecimal or decimal format depending on the setting of the display
format.
1. Settings can be entered and displayed in either hexadecimal or decimal
2. When the displayed value’s set unit is Pulse. When the set unit is mm or
Use the following procedures to display the window shown below.
To create a new project:
To select an existing project:
an existing project
Example: The following window will be displayed after creating a new project
Zone
(See notes 1 and 2.)
• Select File- New; or
• Press the Ctrl+N Keys; or
• Select the New Project Icon from the toolbar.
• Select File - Open; or
• Press the Ctrl+O Keys; or
• Select the Open Icon from the toolbar.
format depending on the setting of the display format.
inches and the pulse rate is set to other than 1, the value displayed will
change to specified set value × Pulse Rate.
Item
C0000001 to 3FFFFFFF Hex (±1,073,741,823) (pulses)
Setting range
Section 4-2
51