CQM1-CIF01 Omron, CQM1-CIF01 Datasheet - Page 61

• Manufacturer Part Number: CQM1-CIF01
• Description: PERIPHERAL CABLE FOR NEC COMP.
• Manufacturer: Omron

Specifications of CQM1-CIF01

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

40
3-2
3-2-1
Adding and Deleting PLCs
Adding and Deleting PLCs
Adding a PLC
1,2,3...
Use the following procedure to add a PLC to a new or existing project.
1. Select the project from the project tree, and either select Edit - New PLC
2. Enter the Device Name.
3. Set the PLC Device Type by click the PLC Device Type drop-down list and
4. Click the Settings Button on the right of the Device Type box. The Device
5. Set the network type. Select either SYSMC WAY (Host Link) or Toolbus.
6. Enter a comment if required.
7. Click the Settings Button on the right of Network Type Selection box.
or right-click and select New PLC from the pop-up menu. The Add PLC Di-
alog Box will be displayed.
Note Use one-byte characters for the device name, except for the ones
selecting the device type.
Type Setup Dialog Box will be displayed. Click the CPU Type drop-down
list, select an applicable CPU type from the list, and click OK.
listed below and blank characters.
! “ # $ % & ‘ ( ) = - ~ ^ ¥ | ’ @ { [ + ; * : } ] < , > . ? /
If [ or ] is used in the device name for PLCs functioning as gate-
ways, the network address for the PLC on the gateway network will
be 0. This will prevent communications with Position Control Units
on the gateway network.
Section 3-2